Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
40
6.5 To Change the Left Hand Oven Door Latch
Remove the outer door panel (see 6.4). Remove screws ‘B’,
which hold the latch assembly to the inner door panel (Fig.
12.16). Fit the new catch and reassemble in reverse order.
Check the door operation.
6.6 To Adjust Left Hand Oven Door Catch Keep
Open the oven door, slacken o the locknut at the base of the
keep, and screw in or out as required until the required t is
obtained. Retighten the locking nut (Fig. 12.17).
6.7 To Change the Right-hand Oven Door Catch
Remove the screws that secure the latch assembly to the
frame (Fig. 10.16). Fit the replacement latch and re-assemble
in reverse order.
Check correct operation of door.
6.8 To Remove the Tall Oven Door
Open the oven door. Supporting the door, remove the 2
screws securing the upper hinge and packing to the cooker
front. Remove the door from the lower hinge by lifting
slightly and moving outwards.
Reassemble in reverse order.
6.9 To Replace the Tall Oven Door Outer Panel
Remove the tall oven door (see 6.7). Lay the door face down
on a suitable surface and remove the 2 screws from bottom
edge of door and the 2 screws from the inside face of the
door.
Remove the outer door panel. Remove the door handle by
unscrewing the 2 screws.
Remove the 2 cross-headed screws holding the door handle
xing bracket to the door panel. Fit the door handle bracket
and the door handle to the new panel.
Fit the panel to the door and reassemble in reverse order.
7.0 To Change an Oven Door Seal
Open the oven door. The seal is held in place by small hooks
on the rear face. At the corner, pull the seal diagonally away
from the door centre until that hook is released (Fig. 12.19).
Proceed to the next hook and release it in a similar way, and
so on. Use force if the hooks are sti, as the old seal will be
discarded.
When tting the new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes of the
door, and proceed round the door, snapping in each hook in
turn.
ArtNo.320-0005 Oven door rubber seal
ArtNo.320-0003 Oven door latch
B
ArtNo.320-0004 Oven door keep
Fig. 12.16
Fig. 12.17
Fig. 12.18
Fig. 12.19
Loading ...
Loading ...
Loading ...