Loading ...
Loading ...
Loading ...
11
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when the clean
transducer/ultrasonic membrane indicator is illuminated on the display. Failure to do so may cause
reduced or no mist output.
1. Remove the tank cover and
set aside. Lift the tank from
the humidifier.
2. Remove the tank and pour
out any water remaining in
the tank.
5. After cleaning, reassemble
the humidifier, fill with water,
plug in, and turn on.
3. Pour out any remaining water
inside the water reservoir.
6. Press and hold the clean
transducer/ultrasonic
membrane button for 3
seconds, until the clean
indicator turns off.
4. Clean the transducer/ultrasonic
membrane with a 50/50 mix
of white vinegar and water on
a cotton swab. Wipe off with a
damp cotton swab.
NEVER touch the transducer/
ultrasonic membrane with your
fingers; the natural oils in the
skin can damage the surface.
NEVER submerge the base in
water or any other liquid.
Loading ...
Loading ...
Loading ...