Loading ...
Loading ...
Loading ...
9
Turn on the Vacation mode
Press the Function key until the icon of Vacation gets flickering, and then press the OK
key for validation, with the corresponding icon illuminated.
Turn off the Vacation mode
When the Vacation function is active, press the Function key to select Vacation, and
then press the OK key for validation, the Vacation function gets disabled, with the
corresponding icon distinguished and the fridge temperature restored to the temperature
value that is set before the said function is enabled.
Door open alarm
If any door is opened for more than 3 minutes, buzzer alarm will be continuously
beeping. It can be stopped by pressing any key button, but will be restored after 3
minutes if the door keeps opening.
The alarm will stop when the doors are closed properly.
Power cut memory
In the case of power failure, the refrigerator will maintain the previous setting when the
power supply is restored.
Power-on delay
In order to protect the compressor from being damaged in the case of short-time power
failure (i.e., less than 5 minutes), the compressor will not be started immediately after it
is powered on. But it will restart after power comes back on for more than 5 minutes.
Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher
than -10℃, digits of the freezer zone get flickering on the display. The freezer
temperature can be displayed when any key is pressed, and the normal display will be
restored when any key is pressed again or after 10s.
Fault alarm
In case E0, E1, E2, EH, or EC is displayed on the display panel, it indicates fault with
the refrigerator. Please contact CHIQ service centre for a service call.
Loading ...
Loading ...
Loading ...