Loading ...
Loading ...
Loading ...
11
2. Please do not use abrasive detergent because it will damage
the Rangehood.
3. Keep water away from motor and other electrical parts as
this will cause damage to the appliance.
4. Before cleaning the appliance please remember to shut off
the power and disconnect the plug.
5. Do not expose the carbon filter to heat.
6. Please don’t tear open the fixed bar around the carbon filter.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
(7) Troubleshooting
Warning: Service
must be performed by an authorised
competent person.
Fault
Cause
Solution
Light on, but motor
does not work
The flaps are blocked Remove the blockage.
The capacitor is damaged Call for service.
The motor is jammed due to
bearing damage
Call for service.
There is a bad smell coming
from the motor
Call for service.
Light does not work,
motor does not work
Beside the above mentioned, check the following:
Light damaged Call for service.
Power cord not connected Check plugged in and
switched on that power is
available.
Oil leakage
Filters saturated with cooking
oils.
Clean the filters.
Leakage between the
connection of U-shaped
section and Rangehood
Remove U-shaped
section and seal
Loading ...
Loading ...