Loading ...
Loading ...
6
Cleaning and maintenance of ice crusher
1) Cleaning of internal and external parts
Note: Unplug the power plug before performing any cleaning or maintenance procedures.
Do not use alcohol to clean the ice crusher, as this may cause plastic parts to crack.
a) exterior
Use a clean, soft cloth to wipe the outside of the ice machine at least once a week, and
then use a damp cloth moistened with a neutral detergent to remove grease or other
impurities.
b) Ice box cleaning (after each use)
Immerse the ice box in a mixture of neutral detergent and water for at least 3 minutes,
then rinse with water and dry.
c) Hopper (after each use)
Open the handle, allow it to dry naturally, and then close it after drying. There is a sharp
blade inside,operate with care.
Common malfunction analysis
Issues
Check items
Possible causes
solutions
Don’t work
Power cord
Din’t plug in or damaged
Plug in or replace the power
cord
Socket
Socket is out of shape
Change another socket
Motor
Motor burnt
Replace the motor
Power suppply
Power switch damaged
Replace the switch
Low voltage or no power
Contact power supply
department
Micro switch
Micro switch damaged
Replace the micro switch
3
Installation
Install the ice crusher like as below:
NOTE: The ice crusher must be installed by a technician.
Unpack the machine
Remove all exterior and interior packaging materials. Check that the ice box,
disassembled handle and instruction manual are included. If any parts are missing, please
contact our customer service.
Warning:
Keep the disables and children away form the foam and other package
materials,which is dangerous.
1.Find a location for your ice crusher where it’s protected from direct sunlight and other
sources of heat (i.e. stove, furnace, radiator). Place the ice crusher on a level surface.
Make sure that there is at least 15cm of space between the back and sides of your ice
crusher and the wall. Don’t place anything on your ice crusher.
2.The appliance must be positioned where the plug is accessible.
Loading ...
Loading ...
Loading ...