Loading ...
Loading ...
Loading ...
FIND YOUR PROBLEM POSSIBLE CAUSE HOW TO FIX IT
HERE
i iiii iiiii i HIIIII
Clothes too wet after spin,,
Drain hose is kinked
Straighten drain hose:
Wash and rinse water temper-
atures are incorrect,,
Cold rinse water used.
iii iiiiii i iii HIIIIIIIIIIIII
The hot wate[ hose and cold water
hose are connected to the wrong
supply faucets
ii ill
Standpipe for the drain hose is not the
correct height.
i llllll l lll
];his is nolmal. Cold rinses save
energy and reduce wrinkling, but the
clothes tend to feel wetter.
Water is entering washer' but
tub does not fill.
Over'sudsing,.
Too much detergent.
Connect the hot water hose to the hot
water faucet and the cold water hose
to the cold water faucet
Standpipe must be a minimum of 33"
high to prevent siphoning
Follow package directions for
recommended amounts of detergent,
To remove the suds, stop machine and
advance the timer to last iinse which
should flush out the extra suds. See
"Io Recondition Clothes" in Total
Laundry Care book
Detergent is not compatible with A low-sudsing detergent may be
water conditions necessary in special soft water
conditions
Items were pretreated befme When pretreating, laundry aids will
washing remain in items Use less detergent
than recommended
iiii iiii iiiiii
Permanent press items become
wrinkled in the washer',,
Laun_hy products such as oxygen
bleach may cause additional sudsing.
Washer is overloaded
Reduce the amount of deter gent when
additional laundry aids are used
H
Do not overload the washer See
Total Laundry Care book
Insufficient water level Wash small loads with maximum
water setting.
Incoirect rinse watei tempelatme. Use cold wateI rinse only Make sure
water hoses are connected to proper
faucets.
Items left in the washer too long after Remove items when cycle is
cycle is completed completed.
NOISE PROBLEMS
lllllll
"Clunking" sound,,
A certain amount of "clunking" or this is no_maI
gem sounds are normal in a heavy-
duty washer
t8
Loading ...
Loading ...
Loading ...