Loading ...
Loading ...
Loading ...
2
Select UP or DOWN to view the tide data from other days.
Fishing
Going Fishing
You can keep track of your daily fish count, count down your
competition time, or set an interval timer to keep track of your
fishing pace.
1
From the watch face, select MOB > Fish.
2
Select an option:
• To count down your remaining competition time, select
Set Timers.
• To track your daily fish count, select Start Fishing > New
Count, and select MOB to increase or BACK to decrease
your fish count.
Anchor
Marking Your Anchor Location
1
From the watch face, select MOB > Anchor.
2
Select MOB > Drop Anchor.
Anchor Settings
Select MOB > Anchor > MOB.
Drift Radius: Sets the allowable drift distance while anchored.
Update interval: Sets the time interval for updating anchor data.
Anchor Assist Settings
From the anchor assist screen, select MOB.
Scope: Sets the first number in the anchor scope ratio. The ratio
is the length of anchor rode in use to the vertical distance
from the bow of the boat to the bottom of the water.
Depth: Sets the depth of the water.
Bow Offset: Sets the distance between the bow of your boat
and the location of your GPS antenna.
Autopilot
WARNING
You are responsible for the safe and prudent operation of your
vessel. The autopilot is a tool that enhances your capability to
operate your boat. It does not relieve you of the responsibility of
safely operating your boat. Avoid navigational hazards and
never leave the helm unattended.
Always be prepared to promptly regain manual control of your
boat.
Learn to operate the autopilot on calm and hazard-free open
water.
Use caution when operating the autopilot near hazards in the
water, such as docks, pilings, and other boats.
Pairing With an Autopilot
1
From the watch face, select MOB > Autopilot > MOB.
2
Bring your quatix device within 3 m (10 ft.) of the marine
device.
3
Set your compatible Garmin autopilot helm control to search
for a remote control.
See your autopilot helm control owner's manual for more
information.
After you pair the devices, they connect automatically when
turned on, within range, and the app is open on the watch. If you
need to pair with another autopilot helm control, in the autopilot
app, hold MENU and select Settings > Pair New.
Controlling the Autopilot
1
From the watch face, select MOB > Autopilot.
2
Select an option:
• To engage the autopilot heading hold, hold a steady
course, select MOB, and release the helm.
• To change the heading, with the autopilot engaged, select
UP for starboard and DOWN for port.
• To change the steering mode, hold MENU, select
Steering Mode, and select an option.
• To perform a steering pattern, hold MENU, select Pattern
Steering, and select a pattern.
NOTE: You can change the steering patterns available on
your quatix device from your autopilot.
• To take the helm and place the autopilot in standby mode,
select MOB.
Boat Data
Streaming Boat Data
You can stream data fields from your compatible chartplotter to
your quatix device. The device displays up to three data fields
per page, and up to six pages of data.
1
From the watch face, select MOB > Boat Data.
2
Bring your quatix device within 3 m (10 ft.) of the chartplotter.
3
Set the chartplotter to enter pairing mode.
See your chartplotter owner's manual for more information.
4
If necessary, on the quatix device, select MOB to modify a
data page.
After the devices are paired, they connect automatically when
they are turned on, within range, and the app is open on the
watch. If you need to pair with another chartplotter, in the boat
data app, hold MENU and select Pair New.
Marking a Waypoint on Your Chartplotter
You can mark a waypoint on your compatible chartplotter using
your quatix device.
1
From the watch face, select MOB > Boat Data.
2
Select MOB > Mark Plotter Wpt.
GNT
™
10
Streaming GNT 10 Data
Before you can stream data fields from your compatible GNT 10
transceiver to your quatix device, you must download the GNT
10 app (Connect IQ Features, page 13).
1
From the watch face, select MOB > GNT 10.
2
Bring your quatix device within 3 m (10 ft.) of the transceiver.
3
Set the transceiver to enter pairing mode.
See your transceiver owner's manual for more information.
4
If necessary, on the quatix device, select MOB to modify a
data page.
The quatix device displays up to three data fields per page, and
up to six pages of data. After the devices are paired, they
connect automatically when they are turned on, within range,
and the app is open on the watch.
TIP: To pair your quatix device with another transceiver, from
the GNT 10 app, hold MENU and select Pair New.
4 Marine Activities
Loading ...
Loading ...
Loading ...