Loading ...
Loading ...
Loading ...
11. Attach a set of Upper Body Covers A and B (88,
89) to the Right Upper Body Arm (15) and the
Right Upper Body Leg (80) with two M3 x 20mm
Screws (79).
Repeat this step on the other side of the
elliptical.
See assembly step 6. Tighten the M8 x 78mm
Bolts (38) and the M8 x 16mm Screws (35).
Then, press the Lower Upright Cover (83) into
place.
11
79
12. The Console (1) can use four AA batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console displays or other electronic
components.
Remove the battery cover from the back of the
Console (1), and insert batteries into the battery
compartment. Make sure to orient the bat-
teries as shown by the diagram inside the
battery compartment. Then, reattach the bat-
tery cover.
12
1\
Y
Cover
11
Loading ...
Loading ...
Loading ...