Summit SPR314LOS 19 Inch Stainless Steel Beverage Center

User Manual - Page 11

For SPR314LOS.

PDF File Manual, 16 pages, Read Online | Download pdf file

SPR314LOS photo
Loading ...
Loading ...
Loading ...
11
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between
72º and
78ºF (23º-26ºC). If the ambient temperature is above or below the recommended
temperatures, the
performance of the unit may be affected. For example, placing your unit in
extremely cold or hot conditions
may cause interior temperatures to fluctuate. The range of 34-46ºF
(1-8ºC) may not be reached.
Control Panel
Mechanical Control
There is a TEMP-ADJ knob inside the beverage cooler. The temperature in the cabinet can be
adjusted within the range 34-46°F
(1-8°C).
To lower the temperature in the cabinet, turn the TEMP-ADJ knob from left to right (clockwise)
by the indicating black dot on the knob. The coldest setting is 7, and the warmest setting is 1.
When using the appliance for the first time, turn the knob to Coldest or 7 to cool down the
cabinet quickly.
The LED light inside is automatically controlled. When you open the door, the light will
turn on
immediately and when you close the door, the light will turn off automatically.
NOTE: If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes
before
restarting the unit. If you attempt to restart before this time delay, the unit will
not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User Manual. Insert the key into the
lock and
turn it counterclockwise to unlock the door. To lock the door, do the reverse operation,
making sure the
metal pin is engaged completely. Remove the key and put it in a secure place for
safekeeping.
Loading ...
Loading ...
Loading ...