Loading ...
Loading ...
Loading ...
Installation Instructions
ROLLERS
The rollers have 3 purposes:
• Rolle_ a@lst so the door closes easily when opened
about hallway: [Raise the fl'ont about 5/8" (16 ram)
fl'om the flooi:]
• Rolle_ at!just so the refiJgerator is fi_mly positioned
on the floor and does not wobble.
• Rollet_ allow you to move the reti_igerator away from
the wall fi_r cleaning.
Final leveling a(!jtlstments should be made after the
reiiigerator has been installed.
To adjust the rollers on 25', 27' mad 29' models:
• Turn the roller
a(!justing sci'e_vs
dockwise to raise
the reti_igerato_;
comaterclockwise to
lower it. Use a 3/8"
hex socket or wrench,
or an ac!justable X
wrench, Rolleradjustingscrew
To adjust the rollers on 21' mad 23' models:
O Remoxe the base _rille by o )enmg the (loot_,
removino_ the screws at each end, and I_ullin°_ it
straight Otlt.
Turn the fl'ont roller ) I1 11
adjustino screws
clockwise to raise
the refl_igeratoi;
comlterclockwise to
lower it. Lse a 3/8
hex socket or wrench,
or an ac!justable
wrench. Roller adjusting screws
These models also have rear a(!justable rollers so w,u
can align the reliJgerator with )'our kitchen cabinets.
Use a long-handled 5/16" socket wrench to turn the
scre_vs fi)r the rear rollei_-_clockwise to raise the
reli_igeratot; comlterclockwise to lower it.
0 Replace the base grille.
DOOR ALIGNMENT
_dter leveling, make sure that the reli_igerator door is 1/16"
higher than the ti'eezer doo_:
To align the doors, a(!iust the reliigerator doo_:
Using a 7/16" socket wrench, turn the door ac!justing
screw to the right to raise the dooi; to the left to h)wer
it. (A nyhm plug, imbedded in the threads of the pin,
prevents the pin ti'om turning unless a wrench is used.)
O _Mter one or two ttlI'ns of the wrench, open and close
the refiJgerator door and check the alignment at the
top ot the (loo_.
Refrigeratordoor
needsto be raised.
Toremovethe basegrille,
openthe doors,rernove
the screwat eachendof
the basegrilleandthen
pull the grillestraightout.
7/16" SocketWrench]
@ RaiseI
26
Loading ...
Loading ...
Loading ...