Loading ...
Loading ...
Loading ...
58
GB
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-734-12(1)
D:\NORM'S JOB\SONY HA\SO120057\BDV-
E6100_4100_3100_E2100\4446734121_GB (CEK)\100ADD.fm
masterpage: Left
The system does not output sound of
TV programs correctly when
connected to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 50).
t Check the connections (page 20).
Severe hum or noise is heard.
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
t Select stereo sound by pressing
AUDIO (page 37).
The sound outputs from the center
speaker only.
t Depending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
t Check the speaker connections and
settings (pages 18, 41).
t Check the sound mode setting
(page 24).
t Depending on the source, the effect of
the surround speakers may be less
noticeable.
t A 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
t Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 48).
A sudden loud music is heard.
t The build-in sound demonstration is
activated. Press
2 – to reduce the
volume or press x to stop the
demonstration.
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
The disc does not play.
t The region code on the BD/DVD does
not match the system.
t Moisture has condensed inside the unit
and may cause damage to the lenses.
Remove the disc and leave the unit
turned on for about half an hour.
t The system cannot play a recorded disc
that is not correctly finalized
(page 61).
File names are not displayed
correctly.
t The system can only display ISO
8859-1 compliant character formats.
Other character formats may be
displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
A disc does not start playing from the
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from start],
then press .
Tuner
Playback
Loading ...
Loading ...
Loading ...