Loading ...
Loading ...
Loading ...
46 - USE 91477A233/B
the oven cavity.
Tray rack
The tray rack has to be inserted into the tray. In
this way fat can be collected separately from
the food which is being cooked.
Digital programmer
The parameters and values for the currently
selected function will be indicated on the
display. To use it, just turn the function and
temperature knobs to select the indicated
values.
Clock indicator light
Minute minder indicator light
Cooking indicator light
Programmed cooking indicator light
Door lock indicator light (pyrolytic models
only)
Control lock indicator light
Showroom indicator light
Defrost indicator light
Temperature indicator light
First use
When using the appliance for the first time or
after a prolonged power failure, will
flash on the display. In order to start a cooking
function, the current time has to be set.
1. Turn the temperature knob to select the
current time.
2. Press the temperature knob to set the hours
and then move to the minutes.
3. Turn the temperature knob to select the
minutes.
4. Press the temperature knob to finish
adjustment.
Using the oven
Traditional cooking
1. Turn the function knob to the right or to the
left to select the wished function (for
example "FAN-ASSISTED ").
2. Turn the temperature knob to the right or to
the left to select the wished temperature (for
example "200°C").
Wait 3 seconds (or press the temperature knob
before waiting 3 seconds) to start cooking.
After having started cooking, press the
temperature knob to enter any setting of
Gently insert racks and trays into the
oven until they come to a stop.
Clean the trays before using them for
the first time to remove any residues left
by the manufacturing process.
If the time is not set, the oven will not
switch on.
It may be necessary to change the
current time, for example for daylight
saving time.
When the current time is shown, the
display will be dimmed 2 minutes after
the knobs were last used.
See General safety instructions.
Cooking functions can be interrupted at
any time by turning the function knob to
the 0 position.
Loading ...
Loading ...
Loading ...