Loading ...
Loading ...
Loading ...
Sani Rinse
Select this option to raise the water temperature in the final
rinse to approximately 155° F (68° C) for 10 minutes. Sani
Rinse adds heat and time to the cycle. In the Normal cycle
this high-temperature rinse sanitizes your dishes and
glassware in accordance with the NSF International
requirements (#95/480/05/2480).
NOTE: Sani Rinse is an option with Pots Pans, Normal
Wash and Water Miser.
No Heat Dry
Select this energy-saving option to dry without heat. No
Heat drying is useful when loads contain plastic
dinnerware that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can
occur. For best drying, use a liquid rinse aid. Some items
(such as plastics) may need towel drying.
NOTE: Quick Wash and Quick Rinse automatically use this
option. No Heat Dry is an option with all other cycles.
Control Lock On
Use the Lock to prevent your dishwasher from accidentally
being turned on. Use the Lock, also, to prevent accidental
cycle or option changes during a cycle.
LOCKON
When LOCK ON is lit, all buttons are disabled.
NOTES:
• The dishwasher door can be opened while the controls
are locked.
• You can turn on the Lock while the dishwasher is
running.
To turn on the Lock
Press and hold
Delay Hours
Select this option to run your dishwasher at a later time or
during off-peak hours. You can add items to the load
anytime during the delay countdown. After adding items,
close the door firmly until it latches. The delay countdown
will not continue if the door is not latched.
• You can delay the start of a cycle up to 9 hours.
• The first time you use Delay Hours, you will see
showing a 1 hour delay.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Repeatedly press
@
until you see the desired hours of delay in the display.
When the delay reaches 9 hours, the delay turns off.
Press DELAY HOURS again to select a new number of
delay hours.
4. Press START.
NOTE: To cancel the delay, press CANCEL/DRAIN until no
delay hours show in the display.
IMPORTANT:
• Operate your dishwasher only when you are at home.
• If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.
for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the
light flashes 3 times.
To turn off the Lock
Press and hold NO HEAT DRY for 4 seconds. The light
turns off.
17
Loading ...
Loading ...
Loading ...