Loading ...
Loading ...
Loading ...
page 8
diagram 2 diagram 3 diagram 4
diagram 1
reverse switch
10. Testing Your Fan.
light
pull chain
extension
fan
pull chain
extension
It is recommended that you test fan before
finalizing installation. Restore power from circuit
box and wall switch (if applicable). Test fan
speeds with the pull chain on the switch housing.
Start at the OFF position (no blade movement).
First pull will set the fan to HI. Second pull will set
the fan to MEDIUM. Third pull will set the fan to
LOW. Fourth pull will re-set the fan to OFF
setting. Test lights with the pull chain in the
middle. (Refer to diagram 1.) If fan and/or lights
do (does) not function, please refer to
"Troubleshooting" section to solve any issues
before contacting Customer Service.
Turn fan completely off before moving the
reverse switch. Set reverse switch to recirculate
air depending on the season:
- DOWN position in summer (diagram 2)
- UP position in winter (diagram 3)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely UP or completely DOWN for fan to
function. If the reverse switch is set in the middle
position (diagram 4), fan will not operate.
Attach pull chain extensions supplied or custom
pull chain extensions (sold separately) may be
attached to the ends of the pull chain.
Loading ...
Loading ...
Loading ...