Loading ...
Loading ...
Loading ...
Know Your Yard Vacuum
Read this operator's manual and safety rules before operating your Yard Vacuum. Compare the illustrations
below with your equipment to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
The operat on of any Yard Vacuum can resu t in fore gn objects being thrown into the eyes,
which can result in severe eye damage. Always wear safety glasses, provided with the
Yard Vacuum, for operating this equipment or while performing any adjustments or repairs on
it.
Starter
Bag_
Blower Chute
Handle
Thro_le Control/
_- Choke Lever
Chute
Wire
Nozzle Height
Adjustment Level
Nozzle
OPERATINGCONTROLS(seeFigure6)
Chipper Chute
Allows twigs and small branches up to 1 1/2" in
diameter to be fed into the impeller for chipping.
Nozzle
Yard waste such as leaves and pine needles can be
vacuumed up through the nozzle for shredding.
Catcher Bag
Collects shredded material fed in through the chipper
chute or vacuumed in through the nozzle.
Blower Chute
When attached to unit, the blower chute is used to
blow or scatter yard waste such as leaves, pine
needle, or small twigs across yard.
Bag Handle
Used to grasp bag in order to assist in attaching,
removing, and emptying bag.
Figure 6
Nozzle Height Adjustment Lever
Used toadjust the nozzle ground clearance ranging
from 5/8" to 3 3/4".
Throttle Control / Choke Lever
Thissingle lever controlsthe engine speed, stop
function, and the choke ofthe carburetor.Through
four separate positionson the leverfrom lefttoright,
the operation isas follows:
Engine Slow/ Start] Choke
Off Idle Run
Primer
The primer is used to assist incold starting an engine.
Starter Handle
Used to start the engine.
Meets ANSI safety standards
Craftsman Yard Vacuums conform tothe safety standard of the American National Standards Institute(ANSI).
7
Loading ...
Loading ...
Loading ...