Loading ...
Loading ...
Loading ...
5
Step 1 Set up your TV
Ready for the step-by-step? You’re only minutes away from TV bliss!
Remove your TV from the box
A
To use the stand
Be careful, it’s heavy!
To mount your TV on a wall, skip to page 6.
Carefully remove the foam packaging on the left and right sides of the TV. Keep the bottom
foam packaging attached as shown in Image #1. On the back of the TV, remove the ten (10) stand
screws from the mounting holes located on the lower corners of each side. Set the screws aside.
B
Remove the two (2) plastic covers from the stand holes on each side of the TV (refer to the
objects marked “B” in Image #2). Put them away for future needs.
Insert the stands *into* the holes where the plastic covers were removed in the previous step.
Carefully align the stands with the screw holes on each side of the TV.
C
Screw in the ten (10) screws you removed in step #1 back into the mounting holes to secure the
stands to each side of the TV. Before moving the TV to its preferred and final location, two
(2)
people should lift the TV enough to allow the third person to remove the bottom foam packaging.
D
Note: We recommend having three (3) people help to safely install the stands. While two (2)
people securely hold the TV upright, another person should install the stands. Make sure
the direction and position of each stand follows the illustrations as shown in the images
below.
DC
Stands
B
Screws
M5x25mm
A
Plastic covers
1 2
3 4
Loading ...
Loading ...
Loading ...