Loading ...
Loading ...
Loading ...
Warning and Safety instructions
10
This washer-dryer is supplied with a special lamp to cope with
particular conditions (e.g. temperature, moisture, chemical resist-
ance, abrasion resistance and vibration). This lamp must only be
used for the purpose for which it is intended. The lamp is not suit-
able for room lighting. Replacement lamps may only be fitted by a
Miele authorised technician or by the Miele Customer Service De-
partment.
The washer-dryer contains 1 light source corresponding to energy
efficiency class G.
The electrical socket must be easily accessible after installation so
that the washer-dryer can be disconnected from the electricity sup-
ply if necessary.
The washer-dryer must be isolated from the electricity supply
when cleaning and maintaining the machine and in the event of a
fault.
The Miele “Water protection system” protects from water damage
provided the following conditions are met:
- The machine is correctly plumbed in and connected to the electri-
city supply.
- If a fault or damage has been identified, the washer-dryer must be
examined by a competent person before further use, and repaired
if necessary.
The water inlet pressure must be at least 100kPa and must not
exceed 1000kPa.
Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the safety standards of the machine.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
Loading ...
Loading ...
Loading ...