Loading ...
Loading ...
Loading ...
Use
12
3.2 First use
1. Insert the plug into an electrical socket.
2. Press the ON /OFF button. The
display shows the flashing symbols.
3. Set the time using the lever (1).
4. Set the hour value by moving the lever
up (+) to increase the value or down (-)
to decrease the value.
5. Confirm the value by placing the lever in
the central position and pressing it (OK):
the appliance will beep.
6. Set the minute value following the same
procedure.
7. After confirming the minute setting, an
acoustic signal sounds and the device
activates CLOCK mode.
Setting the water hardness
Set the water hardness value by selecting
one of the three levels available: HARD,
MEDIUM and SOFT.
1. Hold down the and buttons
simultaneously for 3 seconds: the display
shows HA03.
2. Use the lever, moving it up (+) or down (-) to
set the desired level: HA01(soft), HA02
(medium) and HA03 (hard).
3. Move the lever to the central position
and press (OK) to confirm the value: the
appliance will beep to confirm the
selection made.
Loading ...
Loading ...
Loading ...