Loading ...
Loading ...
Loading ...
Operation
WARNING
To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to: lighter fluid, somvent type cleaners, oil-
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to: coal, magnesium, grain or gun powder. Do not vacuum
expmosive dust, flammable or combustible liquids or hot ashes. Do not use this
vac as a sprayer for any flammable or combustible liquid. To reduce the risk
of health hazards from vapors or dusts, do not vacuum toxic materials.
CAUTtON: To reduce the risk of
hearing damage, wear ear protectors
when using the vac for extended
hours or when using it in a noisy
area.
The operation of any utility vac can
result in foreign objects being blown
into the eyes, which can result in
severe eye damage. Always wear
safety goggles complying with ANSI
Z87.1 (or in Canada CSA Z94.3)
before commencing operation.
Safety goggles are avaHabme at Sears
retait stores.
Your Craftsman four-gallon Portable
Wet/Dry Vac is assembled at the factory
and ready for use when you remove it
from the carton, The unit is ready for dry
vacuuming or blowing. After you plug the
power cord into the wal! receptacle, turn
the unit 'ON" by pushing the switch from
position "O" to position "F'. The symbols
used on the switch are international
symbols. The "O" is the 'OFF" position
and the "J" is the "ON" position,
O= OFF J = ON
Vacuuming Dry Materials
1.The filter must always be in correct
position to reduce the risk of leaks and
possible damage to vac. It is very
important to assemble the filter to the
cage without allowing any possible
leaks or tears. Any leaks will allow
the picked up media to be blown out
of the blower port and back into the
surrounding environment.
2. When using your vac to pick up very fine
dust, it will be necessary for you to
empty the dust drum and clean or
replace the filter at more frequent
intervals to maintain peak vac
performance.
NOTE: A dry filter is necessary to pick up
dry material. If you use your vac to pick up
dust when the filter is wet, the filter will
clog quickly and be very difficult to clean.In
case the filter gets wet, replace it before
continuing to do dry pickups.
Loading ...
Loading ...
Loading ...