Loading ...
Loading ...
Loading ...
5. Operation
<To Change the Right/Left Air Direction>
• Press the louver button (_ as necessary,
• The louver image _ appears,
Each press of the button switches the setting as follows,
_._%_ _ No display
(Stop)
(ON) (OFF)
During swing operation, the arrow dis-
play move to the left and right.
5.6. Ventillation
For LOSSNAY combination
5.6.1. For Wired Remote-controller
• To run the ventilator together with the indoor unit:
• Press the ON/OFF button (_.
• The Vent indication appears on the screen (at _). The ventilator will
now automatically operate whenever the indoor unit is running.
• To run the ventilator independently:
• Press the Mode button (_) until _ appears on the display. This will
cause the ventilator to start.
• To change the ventilator force:
• Press the Ventilation button (_ as necessary.
• Each press toggles the setting, as shown below.
.--'-"
Low High
5.6.2. For Wireless Remote-controller
• The ventillator will automatically operate when the indoor unit turns on.
• No indication on the wireless remote controller.
6. Timer
6.1. For Wired Remote-controller
You can use Function Selection of remote controller to select which of
three types of timer to use: (_ Weekly timer, _) Simple timer, or (_) Auto Off
timer.
6.1.1. Weekly Timer
• The weekly timer can be used to set up to eight operations for each day
of the week.
• Each operation may consist of any of the following: ON/OFF time
together with a temperature setting, or ON/OFF time only, or tempera-
ture setting only.
• When the current time reaches a time set at this timer, the air
conditioner carries out the action set by the timer.
• Time setting resolution for this timer is 1 minute.
Note:
"1. WeeklyTimer/SimpleTimer/Auto OffTimer cannot be used at the same time.
*2. The weekly timer will not operate when any of the following conditions is in
effect.
The timer feature is off; the system is in an malfunction state; a test run is
in progress; the remote controller is undergoing self-check or remote con-
troller check; the user is in the process of setting a function; the user is in
the process of setting the timer; the user is in the process of setting the
current day of the week or time; the system is under central control. (Spe-
cifically, the system will not carry out operations (unit on, unit off, or tem-
perature setting) that are prohibited during these conditions.)
Operation No.
[] [] [] Day Setting
MITS IBISHI ELECTF C
_TEMP.
<How to Set the Weekly Timer>
1, Be sure that you are at a standard control screen, and that the weekly
timer indicator _ is shown in the display,
2, Press the Timer Menu button @, so that the "Set Up" appears on the
screen (at _), (Note that each press of the button toggles the display
between "Set Up" and "Monitor",)
3, Press the Timer On/Off (Set Day) button (_ to set the day, Each press
advances the display at _ to the next setting, in the following sequence:
"Sun Mon Tues Wed Thurs Fri Sat"-> "Sun" -> ... -> "Fri" -> "Sat" -> "Sun
Mon Tues Wed Thurs Fri Sat"...
4. Press the V or/k Operation button ((_ or (_) as necessary to select the
appropriate operation number (1 to 8) _.
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix
illustrated below.
(The remote-controller display at left shows how the display would
appear when setting Operation 1 for Sunday to the values indicated
below.)
Setup Matrix
Op No Sunday Monday .. Saturday
• 8:30
No. 1 •ON
• 73 F
No. 8
<Operation 1 settings for Sunday> I
<Operation
2
settings
for
every day>
I
Start the air conditioner at 8:30, with I Turn off the air conditioner at 10:00.
the temperature set to 73 °E
i J
Note:
By setting the day to "Sun MonTuesWedThurs Fri Sat", you can set the same
operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
<Setting the Weekly Timer>
Shows the time _ _ Shows the selected operation (ON or OFF)
setting / * Does not appear if operation is not set.
[
Shows the temperature setting
Fn'3 / _ * Does not appear iftemperature is not
- set.
5. Press the appropriate Set Time button @ as necessary to set the
desired time (at _).
• As you hold the button down, the time first increments in minute inter-
vals, then in ten-minute intervals, and then in one-hour intervals.
6. Press the ON/OFF button (_ to select the desired operation (ON or
OFF), at _.
• Each press changes the next setting, in the following sequence:
No display (no setting) -> "ON" -> "OFF"
8
Loading ...
Loading ...
Loading ...