Loading ...
Loading ...
Loading ...
Handle_
pper
Chipper Chute
Starter Handle...
Two Bar
(Model CS4210 Only)
i Latch
--Chute Deflector
-Wing Knob
-Lock Rod
Figure 4
SECTION4: OPERATINGYOURCHIPPERSHREDDER
,_ WARNING: The operation of any chipper
shredder can result in foreign objects being
thrown. Always wear the safety glasses
provided with this unit or eye shields before
chipping or shredding and while performing
any adjustments or repairs.
GasAndOilFill-Up
Service the engine with gasoline and oil as instructed in
the separate engine manual packed with your chipper
shredder. Read instructions carefully.
,_ WARNING: Never fill fuel tank indoors with
engine running or until the engine has been
allowed to cool for at least two minutes after
running.
StartingEngine
• Attach spark plug wire to spark plug. Make certain
the metal cap on the end of the spark plug is
fastened securely over the metal tip on the spark
plug.
• Open fuel shut-off valve
(Model CS4210).
• Move choke control lever to
CHOKE position (Models
CS4210 & CS4265).
NOTE: (A warm engine may not require choking).
• Move throttle control lever to FAST (rabbit) position
(Model CS4265).
I+IRuN
Loading ...
Loading ...
Loading ...