Garmin 010-02156-12 Forerunner 45S User Manual

FORERUNNER

45/45 PLUS

Owner’s Manual

improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to

www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin

, the Garmin logo, ANT+

, Auto Lap

, Auto Pause

, Edge

, Forerunner

, and VIRB

are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other

countries. Body Battery

™

, Connect IQ

™

, Garmin Connect

™

, Garmin Express

™

, Garmin Move IQ

™

, and TrueUp

™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks

may not be used without the express permission of Garmin.

Android

™

is a trademark of Google Inc. Apple

, iPhone

, and Mac

are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth

word mark and logos are

owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. The Cooper Institute

, as well as any related trademarks, are the property of The Cooper

Institute. Advance heartbeat analytics by Firstbeat. iOS

is a registered trademark of Cisco Systems, Inc. used under license by Apple Inc. Windows

and Windows NT

are registered

trademarks of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.

This product is ANT+

certified. Visit www.thisisant.com/directory for a list of compatible products and apps.

Table of Contents

Introduction..................................... 1

Device Overview...................................... 1

Status Icons............................................ 2

Pairing Your Smartphone with Your

Device...................................................... 2

Viewing the Controls Menu.................... 2

Training........................................... 3

Going for a Run....................................... 3

Starting an Activity..................................4

Tips for Recording Activities.............. 4

Stopping an Activity................................ 4

Evaluating an Activity............................. 4

Workouts................................................. 4

Following a Workout........................... 5

About the Training Calendar.............. 6

Adaptive Training Plans......................6

Interval Workouts................................ 7

Using Run and Walk Intervals................ 8

Training Indoors...................................... 8

Calibrating the Treadmill Distance.... 9

Personal Records....................................9

Viewing Your Personal Records......... 9

Restoring a Personal Record..............9

Clearing a Personal Record................ 9

Clearing All Personal Records............9

Activity Tracking............................ 10

Auto Goal...............................................10

Using the Move Alert............................ 10

Turning on the Move Alert................ 10

Garmin Move IQ™ Events..................... 10

Intensity Minutes.................................. 11

Earning Intensity Minutes................. 11

Sleep Tracking...................................... 11

Using Automated Sleep Tracking.... 11

Using Do Not Disturb Mode..............11

Smart Features.............................. 12

Bluetooth Connected Features............ 12

Manually Syncing Data with Garmin

Connect............................................. 12

Widgets................................................. 13

Viewing the Widgets......................... 13

Locating a Lost Mobile Device.............14

Controlling Music Playback on a

Connected Smartphone....................... 14

Enabling Bluetooth Notifications......... 14

Viewing Notifications....................... 14

Managing Notifications.................... 14

Turning Off the Bluetooth Smartphone

Connection........................................ 15

Turning On and Off Smartphone

Connection Alerts............................. 15

Syncing Activities................................. 15

Playing Audio Prompts During Your

Activity................................................... 15

Safety and Tracking Features.............. 16

Adding Emergency Contacts............16

Turning Incident Detection On and

Off...................................................... 16

Requesting Assistance..................... 16

Heart Rate Features....................... 17

Wrist-based Heart Rate........................ 17

Wearing the Device........................... 17

Tips for Erratic Heart Rate Data....... 17

Viewing the Heart Rate Widget........ 18

Broadcasting Heart Rate Data to

Garmin Devices................................. 18

Setting an Abnormal Heart Rate

Alert................................................... 19

Turning Off the Wrist-based Heart

Rate Monitor......................................19

About Heart Rate Zones....................... 19

Fitness Goals.................................... 19

Letting the Device Set Your Heart Rate

Zones................................................. 19

Setting Your Maximum Heart Rate.. 20

Customizing Your Heart Rate Zones

and Maximum Heart Rate................ 20

Heart Rate Zone Calculations.......... 20

Getting Your VO2 Max. Estimate for

Running................................................. 20

About VO2 Max. Estimates.............. 21

Recovery Time...................................... 21

Viewing Your Recovery Time........... 22

Viewing Your Predicted Race Times... 22

Heart Rate Variability and Stress

Level...................................................... 22

Using the Stress Level Widget......... 22

Body Battery.......................................... 23

Table of Contents i

Viewing the Body Battery Widget.....24

Tips for Improved Body Battery

Data....................................................25

History........................................... 25

Viewing History..................................... 25

Deleting History.................................... 25

Viewing Data Totals............................. 25

Data Management................................ 25

Deleting Files..................................... 26

Disconnecting the USB Cable.......... 26

Garmin Connect.................................... 27

Syncing Your Data with the Garmin

Connect App......................................27

Using Garmin Connect on Your

Computer........................................... 28

ANT+ Sensors................................ 28

Pairing Your ANT+ Sensors................. 28

Foot Pod................................................ 28

Going for a Run Using a Foot Pod... 28

Foot Pod Calibration......................... 29

Setting Foot Pod Speed and

Distance.............................................29

Using an Optional Bike Speed or

Cadence Sensor.................................... 29

Customizing Your Device............... 30

Setting Up Your User Profile................ 30

Activity Options..................................... 30

Customizing Your Activity Options.. 30

Changing Your Displayed

Activities............................................ 30

Customizing the Data Fields............ 31

Customizing the Widget Loop............. 31

Alerts..................................................... 31

Setting a Recurring Alert.................. 31

Setting Your Heart Rate Alerts......... 31

Marking Laps by Distance.................... 32

Turning on the Lap Key........................ 32

Using the Auto Pause® Feature.......... 32

Enabling Self Evaluation....................... 32

Changing the GPS Setting.................... 33

GPS and Other Satellite Systems.....33

Activity Tracking Settings.................... 33

Turning Off Activity Tracking........... 33

Watch Face Settings.............................33

Customizing the Watch Face........... 34

Downloading Connect IQ Features.. 34

Downloading Connect IQ Features

Using Your Computer....................... 34

System Settings.................................... 34

Time Settings.................................... 34

Time Zones....................................... 35

Changing the Backlight Settings......35

Setting the Device Sounds............... 35

Displaying Pace or Speed.................35

Changing the Units of Measure....... 35

Clock...................................................... 35

Setting the Time Manually............... 35

Setting an Alarm............................... 36

Deleting an Alarm............................. 36

Starting the Countdown Timer......... 36

Using the Stopwatch.........................36

Device Information......................... 37

Viewing Device Information................. 37

Charging the Device............................. 37

Tips for Charging the Device............ 37

Device Care........................................... 38

Cleaning the Device.......................... 38

Changing the Bands..........................38

Specifications....................................... 39

Troubleshooting.............................39

Product Updates................................... 39

Updating the Software Using the

Garmin Connect App........................ 39

Setting Up Garmin Express.............. 39

Updating the Software Using Garmin

Express.............................................. 39

Getting More Information.....................39

Activity Tracking................................... 40

My daily step count does not

appear................................................ 40

My step count does not seem

accurate.............................................40

The step counts on my device and my

Garmin Connect account don't

match................................................. 40

My intensity minutes are flashing....40

Acquiring Satellite Signals................... 40

Improving GPS Satellite Reception.. 41

Restarting the Device........................... 41

ii Table of Contents

Resetting All Default Settings.............. 41

My device is in the wrong language.... 41

Is my smartphone compatible with my

device?.................................................. 41

My phone will not connect to the

device.................................................... 42

Can I use the cardio activity

outdoors?.............................................. 42

Tips for Existing Garmin Connect

Users..................................................... 42

Maximizing Battery Life........................42

How can I manually pair ANT+

sensors?................................................ 43

Appendix........................................43

Data Fields............................................ 43

VO2 Max. Standard Ratings................. 44

Wheel Size and Circumference............ 45

Index..............................................47

Table of Contents iii

Introduction

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

Always consult your physician before you begin or modify any exercise program.

Device Overview

LIGHT

Select to turn the device on.

Select to turn the backlight on and off.

Hold to view the controls menu.

START

STOP

Select to start and stop the activity timer.

Select to choose an option or to acknowledge a message.

BACK

Select to return to the previous screen.

Select to record a lap during an activity.

DOWN

Select to scroll through the widgets, data screens, options, and settings.

Hold to open the music controls (Controlling Music Playback on a Connected Smartphone,

page 14).

Select to scroll through the widgets, data screens, options, and settings.

Hold to view the menu.

Introduction 1

Status Icons

The GPS status ring and icons temporarily overlay each data screen. For outdoor activities, the status ring turns

green when GPS is ready. A flashing icon means the device is searching for a signal. A solid icon means the

signal was found or the sensor is connected.

GPS GPS status

Battery status

Smartphone connection status

Heart rate status

Foot pod status

Speed and cadence sensor status

Pairing Your Smartphone with Your Device

To use the connected features of the Forerunner device, it must be paired directly through the Garmin Connect

™

app, instead of from the Bluetooth

settings on your smartphone.

1 From the app store on your smartphone, install and open the Garmin Connect app.

2 Bring your smartphone within 10 m (33 ft.) of your device.

3 Select LIGHT to turn on the device.

The first time you turn on the device, it is in pairing mode.

TIP: You can hold UP, and select > Phone > Pair Phone to manually enter pairing mode.

4 Select an option to add your device to your Garmin Connect account:

• If this is the first time you are pairing a device with the Garmin Connect app, follow the on-screen

instructions.

• If you already paired another device with the Garmin Connect app, from the or menu, select

Garmin Devices > Add Device, and follow the on-screen instructions.

Viewing the Controls Menu

The controls menu contains options, such as turning on do not disturb mode, locking the keys, and turning the

device off.

1 From any screen, hold LIGHT.

2 Select UP or DOWN to scroll through the options.

2 Introduction

Training

Going for a Run

The first fitness activity you record on your device can be a run, ride, or any outdoor activity. You may need to

charge the device before starting the activity (Charging the Device, page 37).

1 From the watch face, select START.

2 Select an activity.

3 Go outside, and wait while the device locates satellites.

4 Select START to start the activity timer.

5 Go for a run.

6 After you complete your run, select STOP to stop the timer.

7 Select an option:

• Select Resume to restart the timer.

• Select Save to save the run and reset the timer. You can view a summary, or select DOWN to view more

data.

• Select Discard > Yes to delete the run.

Training 3

Starting an Activity

When you start an activity, GPS turns on automatically (if required). If you have an optional wireless sensor, you

can pair it to the Forerunner device (Pairing Your ANT+ Sensors, page 28).

1 From the watch face, select START.

2 Select an activity.

NOTE: You can select different activities to display on the device through your Garmin Connect account

(Changing Your Displayed Activities, page 30).

3 If the activity requires GPS signals, go outside to an area with a clear view of the sky.

4 Wait until the green status ring appears.

The device is ready after it establishes your heart rate, acquires GPS signals (if required), and connects to

your wireless sensors (if required).

5 Select START to start the activity timer.

The device records activity data only while the activity timer is running.

TIP: You can hold DOWN while in an activity to open the music controls (Controlling Music Playback on a

Connected Smartphone, page 14).

Tips for Recording Activities

• Charge the device before starting an activity (Charging the Device, page 37).

• Select BACK to record laps.

• Select UP or DOWN to view additional data pages.

Stopping an Activity

1 Select STOP.

2 Select an option:

• To resume your activity, select Resume.

• To save the activity, select Save.

NOTE: If self evaluation is enabled, you can enter your perceived effort for the activity (Enabling Self

Evaluation, page 32).

• To discard the activity, select Discard > Yes.

Evaluating an Activity

Before you can evaluate an activity, you must enable the self-evaluation setting on your Forerunner device

(Enabling Self Evaluation, page 32).

You can record how you felt during a run, bike, or swim activity.

1 After you complete an activity, select Save.

2 Select a number that corresponds with your perceived effort.

NOTE: You can select to skip the self evaluation.

3 Select how you felt during the activity.

You can view evaluations in the Garmin Connect app.

Workouts

You can create custom workouts that include goals for each workout step and for varied distances, times, and

calories. You can create and find more workouts using Garmin Connect or select a training plan that has built-in

workouts, and transfer them to your device.

You can schedule workouts using Garmin Connect. You can plan workouts in advance and store them on your

device.

4 Training

Following a Workout

Your device can guide you through multiple steps in a workout.

NOTE: Before you can download and use a training plan or workout, you must have a Garmin Connect account

(Pairing Your Smartphone with Your Device, page 2).

1 Select START.

2 Select an activity.

3 Select Options > Workouts.

NOTE: This option appears only when you have workouts loaded on your device for the selected activity.

4 Select an option:

• Select Intervals to do or edit an interval workout.

• Select My Workouts to do workouts downloaded from Garmin Connect.

• Select Training Calendar to do or view your scheduled workouts.

5 Follow the on-screen instructions.

Creating a Custom Workout on Garmin Connect

Before you can create a workout on the Garmin Connect app, you must have a Garmin Connect account

(Garmin Connect, page 27).

1 From the Garmin Connect app, select or .

2 Select Training > Workouts > Create a Workout.

3 Select an activity.

4 Create your custom workout.

5 Select Save.

6 Enter a name for your workout, and select Save.

The new workout appears in your list of workouts.

NOTE: You can send this workout to your device (Sending a Custom Workout to Your Device, page 5).

Sending a Custom Workout to Your Device

You can send a custom workout you created with the Garmin Connect app to your device (Creating a Custom

Workout on Garmin Connect, page 5).

1 From the Garmin Connect app, select or .

2 Select Training > Workouts.

3 Select a workout from the list.

4 Select .

5 Select your compatible device.

6 Follow the on-screen instructions.

Starting a Workout

Before you can start a workout, you must download the workout from your Garmin Connect account.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Workouts > My Workouts.

4 Select a workout.

NOTE: Only workouts that are compatible with the selected activity appear in the list.

5 Select Do Workout.

6 Select START to start the activity timer.

After you begin a workout, the device displays each step of the workout, step notes (optional), the target

(optional), and the current workout data.

Training 5

About the Training Calendar

The training calendar on your device is an extension of the training calendar or schedule you set up in Garmin

Connect. After you have added a few workouts to the Garmin Connect calendar, you can send them to your

device. All scheduled workouts sent to the device appear in the calendar widget. When you select a day in the

calendar, you can view or do the workout. The scheduled workout stays on your device whether you complete it

or skip it. When you send scheduled workouts from Garmin Connect, they overwrite the existing training

calendar.

Viewing Scheduled Workouts

You can view workouts scheduled in your training calendar and start a workout.

1 Press START.

2 Select an activity.

3 Select Workouts > Training Calendar.

Your scheduled workouts appear, sorted by date.

4 Select a workout.

5 Select an option:

• To view the steps for the workout, select View.

• To start the workout, select Do Workout.

Adaptive Training Plans

Your Garmin Connect account has an adaptive training plan and Garmin

coach to fit your training goals. For

example, you can answer a few questions and find a plan to help you complete a 5 km race. The plan adjusts to

your current level of fitness, coaching and schedule preferences, and race date. When you start a plan, the

Garmin Coach widget is added to the widget loop on your Forerunner device.

Using Garmin Connect Training Plans

Before you can download and use a training plan from Garmin Connect, you must have a Garmin Connect

account (Garmin Connect, page 27), and you must pair the Forerunner device with a compatible smartphone.

1 From the Garmin Connect app, select or .

2 Select Training > Training Plans.

3 Select and schedule a training plan.

4 Follow the on-screen instructions.

5 Review the training plan in your calendar.

6 Training

Starting Today's Workout

After you send a Garmin Coach training plan to your device, the Garmin Coach widget appears in your widget

loop.

1 From the watch face, select UP or DOWN to view the Garmin Coach widget.

If a workout for this activity is scheduled for today, the device shows the workout name and prompts you to

start it.

2 Select START.

3 Select View to view the workout steps (optional).

4 Select Do Workout.

5 Follow the on-screen instructions.

Interval Workouts

You can create interval workouts based on distance or time. The device saves your custom interval workout

until you create another interval workout. You can use open intervals for track workouts and when you are

running a known distance.

Creating an Interval Workout

Interval workouts are available for running and biking activities.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Workouts > Intervals > Edit > Interval > Type.

NOTE: This option appears only when you have workouts loaded on your device for the selected activity.

4 Select Distance, Time, or Open.

TIP: You can create an open-ended interval by selecting the Open option.

5 If necessary, select Duration, enter a distance or time interval value for the workout, and select .

6 Select BACK.

7 Select Rest > Type.

8 Select Distance, Time, or Open.

9 If necessary, select Duration, enter a distance or time value for the rest interval, and select .

10 Select BACK.

11 Select one or more options:

• To set the number of repetitions, select Repeat.

• To add an open-ended warm up to your workout, select Warm Up > On.

• To add an open-ended cool down to your workout, select Cool Down > On.

Training 7

Starting an Interval Workout

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Workouts > Intervals > Do Workout.

4 Select START to start the activity timer.

5 When your interval workout has a warm up, select BACK to begin the first interval.

6 Follow the on-screen instructions.

After you complete all of the intervals, a message appears.

Stopping an Interval Workout

• At any time, select BACK to stop the current interval or rest period and transition to the next interval or rest

period.

• After all intervals and rest periods are complete, select BACK to end the interval workout and transition to a

timer that can be used for cool down.

• At any time, select STOP to stop the activity timer. You can resume the timer or end the interval workout.

Using Run and Walk Intervals

NOTE: You must set up the run/walk intervals before starting a run. After you start the run timer, you cannot

change the settings.

1 From the watch face, select START.

2 Select a running activity.

NOTE: Walk break alerts are available only for running activities.

3 Select Options > Alerts > Run/Walk.

4 Set the run time for each interval.

5 Set the walk time for each interval.

6 Go for a run.

Each time you complete an interval, a message appears. The device also beeps or vibrates if audible tones are

turned on (Setting the Device Sounds, page 35). After you turn on the run/walk intervals, it is used each time

you go for a run until you turn it off or enable a different run mode.

Training Indoors

You can turn off GPS when you are training indoors or to save battery life. When running or walking with GPS

turned off, speed and distance are calculated using the accelerometer in the device. The accelerometer is self-

calibrating. The accuracy of the speed and distance data improves after a few outdoor runs using GPS.

When cycling with GPS turned off, speed and distance data are not available unless you have an optional

sensor that sends speed and distance data to the device, such as a speed or cadence sensor.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > GPS > Off.

NOTE: If you select an activity that is typically done indoors, GPS is automatically turned off.

8 Training

Calibrating the Treadmill Distance

To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run

at least 1.5 km (1 mi.) on a treadmill. If you use different treadmills, you can manually update the calibration

each time you change treadmills.

1 Start a treadmill activity (Starting an Activity, page 4), and run at least 1.5 km (1 mi.) on the treadmill.

2 After you complete your run, select STOP.

3 Select an option:

• To calibrate the treadmill distance the first time, select Save.

The device prompts you to complete the treadmill calibration.

• To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > Yes.

4 Check the treadmill display for the distance traveled, and enter the distance on your device.

Personal Records

When you complete an activity, the device displays any new personal records you achieved during that activity.

Personal records include your fastest time over several typical race distances and longest run or ride.

Viewing Your Personal Records

1 From the watch face, hold UP.

2 Select History > Records.

3 Select a sport.

4 Select a record.

5 Select View Record.

Restoring a Personal Record

You can set each personal record back to the one previously recorded.

1 From the watch face, hold UP.

2 Select History > Records.

3 Select a sport.

4 Select a record to restore.

5 Select Previous > Yes.

NOTE: This does not delete any saved activities.

Clearing a Personal Record

1 From the watch face, hold UP.

2 Select History > Records.

3 Select a sport.

4 Select a record to delete.

5 Select Clear Record > Yes.

NOTE: This does not delete any saved activities.

Clearing All Personal Records

1 From the watch face, hold UP.

2 Select History > Records.

3 Select a sport.

4 Select Clear All Records > Yes.

The records are deleted for that sport only.

NOTE: This does not delete any saved activities.

Training 9

Activity Tracking

The activity tracking feature records your daily step count, distance traveled, intensity minutes, calories burned,

and sleep statistics for each recorded day. Your calories burned includes your base metabolism plus activity

calories.

The number of steps taken during the day appears on the steps widget. The step count is updated periodically.

For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.

Auto Goal

Your device creates a daily step goal automatically, based on your previous activity levels. As you move during

the day, the device shows your progress toward your daily goal .

If you choose not to use the auto goal feature, you can set a personalized step goal on your Garmin Connect

account.

Using the Move Alert

Sitting for prolonged periods of time can trigger undesirable metabolic state changes. The move alert reminds

you to keep moving. After one hour of inactivity, Move! and the red bar appear. Additional segments appear

after every 15 minutes of inactivity. The device also beeps or vibrates if audible tones are turned on (Setting the

Device Sounds, page 35).

Go for a short walk (at least a couple of minutes) to reset the move alert.

Turning on the Move Alert

1 From the watch face, hold UP.

2 Select > Activity Tracking > Move Alert > On.

Garmin Move IQ

™

Events

The Move IQ feature automatically detects activity patterns, such as walking, running, biking, swimming, and

elliptical training, for at least 10 minutes. You can view the event type and duration on your Garmin Connect

timeline, but they do not appear in your activities list, snapshots, or newsfeed. For more detail and accuracy,

you can record a timed activity on your device.

10 Activity Tracking

Intensity Minutes

To improve your health, organizations such as the World Health Organization recommend at least 150 minutes

per week of moderate intensity activity, such as brisk walking, or 75 minutes per week of vigorous intensity

activity, such as running.

The device monitors your activity intensity and tracks your time spent participating in moderate to vigorous

intensity activities (heart rate data is required to quantify vigorous intensity). You can work toward achieving

your weekly intensity minutes goal by participating in at least 10 consecutive minutes of moderate to vigorous

intensity activities. The device adds the amount of moderate activity minutes with the amount of vigorous

activity minutes. Your total vigorous intensity minutes are doubled when added.

Earning Intensity Minutes

Your Forerunner device calculates intensity minutes by comparing your heart rate data to your average resting

heart rate. If heart rate is turned off, the device calculates moderate intensity minutes by analyzing your steps

per minute.

• Start a timed activity for the most accurate calculation of intensity minutes.

• Exercise for at least 10 consecutive minutes at a moderate or vigorous intensity level.

• Wear your device all day and night for the most accurate resting heart rate.

Sleep Tracking

While you are sleeping, the device automatically detects your sleep and monitors your movement during your

normal sleep hours. You can set your normal sleep hours in the user settings on your Garmin Connect account.

Sleep statistics include total hours of sleep, sleep levels, and sleep movement. You can view your sleep

statistics on your Garmin Connect account.

NOTE: Naps are not added to your sleep statistics. You can use do not disturb mode to turn off notifications

and alerts, with the exception of alarms (Using Do Not Disturb Mode, page 11).

Using Automated Sleep Tracking

1 Wear your device while sleeping.

2 Upload your sleep tracking data to the Garmin Connect site (Garmin Connect, page 27).

You can view your sleep statistics on your Garmin Connect account.

Using Do Not Disturb Mode

You can use do not disturb mode to turn off the backlight, tone alerts, and vibration alerts. For example, you can

use this mode while sleeping or watching a movie.

NOTE: You can set your normal sleep hours in the user settings on your Garmin Connect account. You can

enable the Sleep Time option in the system settings to automatically enter do not disturb mode during your

normal sleep hours (System Settings, page 34).

1 Hold LIGHT.

2 Select Do Not Disturb.

Activity Tracking 11

Smart Features

Bluetooth Connected Features

The Forerunner device has several Bluetooth connected features for your compatible smartphone using the

Garmin Connect app.

Activity uploads: Automatically sends your activity to the Garmin Connect app as soon as you finish recording

the activity.

Audio prompts: Allows the Garmin Connect app to play status announcements, such as mile splits and other

data, on your smartphone during a run or other activity.

Find my phone: Locates your lost smartphone that is paired with your Forerunner device and currently within

range.

Find my watch: Locates your lost Forerunner device that is paired with your smartphone and currently within

range.

Music controls: Allows you to control the music player on your smartphone.

Phone notifications: Displays phone notifications and messages on your Forerunner device.

Safety and tracking features: Allows you to send messages and alerts to friends and family, as well as request

assistance from emergency contacts set up in the Garmin Connect app. For more information, go to Safety

and Tracking Features, page 16.

Social media interactions: Allows you to post an update to your favorite social media website when you upload

an activity to the Garmin Connect app.

Software updates: Allows you to update your device software.

Weather updates: Sends real-time weather conditions and notifications to your device.

Workout downloads: Allows you to browse for workouts in the Garmin Connect app and wirelessly send them

to your device.

Manually Syncing Data with Garmin Connect

1 Hold LIGHT to view the controls menu.

2 Select .

12 Smart Features

Widgets

Your device comes preloaded with widgets that provide at-a-glance information. Some widgets require a

Bluetooth connection to a compatible smartphone.

Some widgets are not visible by default. You can add them to the widget loop manually (Customizing the

Widget Loop, page 31).

Body Battery

™

: With all day wear, displays your current Body Battery level and a graph of your level for the last

several hours.

Calendar: Displays upcoming meetings from your smartphone calendar.

Calories: Displays your calorie information for the current day.

Garmin coach: Displays scheduled workouts when you select a Garmin coach training plan in your Garmin

Connect account.

Health stats: Displays a dynamic summary of your current health statistics. The measurements includes heart

rate, Body Battery level, stress, and more.

Heart rate: Displays your current heart rate in beats per minute (bpm) and a graph of your average resting heart

rate (RHR).

History: Displays your activity history and a graph of your recorded activities.

Intensity minutes: Tracks your time spent participating in moderate to vigorous activities, your weekly intensity

minutes goal, and progress toward your goal.

Last Run: Displays a brief summary of your last recorded run.

Music controls: Provides music player controls for your smartphone.

My day: Displays a dynamic summary of your activity today. The metrics include timed activities, intensity

minutes, steps, calories burned, and more.

Notifications: Alerts you to incoming calls, texts, social network updates, and more, based on your smartphone

notification settings.

Steps: Tracks your daily step count, step goal, and data for previous days.

Stress: Displays your current stress level and a graph of your stress level. You can do a breathing activity to

help you relax.

Weather: Displays the current temperature and weather forecast.

Viewing the Widgets

Your device comes preloaded with widgets that provide at-a-glance information. Some widgets require a

Bluetooth connection to a compatible smartphone.

• From the watch face, select UP or DOWN to view the widgets.

Available widgets include heart rate and activity tracking.

• Select START to view additional options and functions for a widget.

About My Day

The My Day widget is a daily snapshot of your activity. This is a dynamic summary that updates throughout the

day. The metrics include your last recorded sport, intensity minutes for the week, steps, calories burned, and

more. You can select START to view additional metrics.

Health Stats Widget

The Health Stats widget provides an at-a-glance view of your health data. This is a dynamic summary that

updates throughout the day. The metrics include your heart rate, stress level, and Body Battery level. You can

select START to view additional metrics.

Viewing the Weather Widget

Weather requires a Bluetooth connection to a compatible smartphone.

1 From the watch face, select UP or DOWN to view the weather widget.

2 Select START to view hourly weather data.

3 Select DOWN to view daily weather data.

Smart Features 13

Locating a Lost Mobile Device

You can use this feature to help locate a lost mobile device that is paired using Bluetooth wireless technology

and currently within range.

1 Hold LIGHT to view the controls menu.

2 Select .

The Forerunner device begins searching for your paired mobile device. An audible alert sounds on your

mobile device, and the Bluetooth signal strength displays on the Forerunner device screen. The Bluetooth

signal strength increases as you move closer to your mobile device.

3 Select BACK to stop searching.

Controlling Music Playback on a Connected Smartphone

1 On your smartphone, start playing a song or playlist.

2 Hold DOWN from any screen to open the music controls.

3 Select an option:

• Select to play and pause the current music track.

• Select to skip to the next music track.

• Select to open more music controls, such as volume and previous track.

Enabling Bluetooth Notifications

Before you can enable notifications, you must pair the Forerunner device with a compatible mobile device

(Pairing Your Smartphone with Your Device, page 2).

1 From the watch face, hold UP.

2 Select > Phone > Notifications > Status > On.

3 Select During Activity.

4 Select a notification preference.

5 Select a sound preference.

6 Select Not During Activity.

7 Select a notification preference.

8 Select a sound preference.

Viewing Notifications

1 From the watch face, select UP or DOWN to view the notifications widget.

2 Select START.

3 Select a notification.

4 Select DOWN for more options.

5 Select BACK to return to the previous screen.

Managing Notifications

You can use your compatible smartphone to manage notifications that appear on your Forerunner device.

Select an option:

• If you are using an iPhone

device, go to the iOS

notifications settings to select the items to show on the

device.

• If you are using an Android

™

smartphone, from the Garmin Connect app, select Settings > Smart

Notifications.

14 Smart Features

Turning Off the Bluetooth Smartphone Connection

1 Hold LIGHT to view the controls menu.

2 Select to turn off the Bluetooth smartphone connection on your Forerunner device.

Refer to the owner's manual for your mobile device to turn off Bluetooth wireless technology on your mobile

device.

Turning On and Off Smartphone Connection Alerts

You can set the Forerunner device to alert you when your paired smartphone connects and disconnects using

Bluetooth technology.

NOTE: Smartphone connection alerts are turned off by default.

1 From the watch face, hold UP.

2 Select > Phone > Connected Alerts > On.

Syncing Activities

You can sync activities from other Garmin devices to your Forerunner device using your Garmin Connect

account. This allows your device to more accurately reflect your training status and fitness. For example, you

can record a ride with an Edge

device, and view your activity details on your Forerunner device.

1 From the watch face, hold UP.

2 Select > User Profile > Physio TrueUp.

When you sync your device with your smartphone, recent activities from your other Garmin devices appear on

your Forerunner device.

Playing Audio Prompts During Your Activity

Before you can set up audio prompts, you must have a smartphone with the Garmin Connect app paired to your

Forerunner device.

You can set the Garmin Connect app to play motivational status announcements and training alerts on your

smartphone during a run or other activity. During an audio prompt, the Garmin Connect app mutes the primary

audio of the smartphone to play the announcement. You can customize the volume levels on the Garmin

Connect app.

1 From the Garmin Connect app, select or .

2 Select Garmin Devices.

3 Select your device.

4 Select Activity Options > Audio Prompts.

5 Select an option.

Smart Features 15

Safety and Tracking Features

CAUTION

Incident detection and assistance are supplemental features and should not be relied on as a primary method

to obtain emergency assistance. The Garmin Connect app does not contact emergency services on your

behalf.

The Forerunner device has safety and tracking features that must be set up with the Garmin Connect app.

NOTICE

To use these features, you must be connected to the Garmin Connect app using Bluetooth technology. You can

enter emergency contacts in your Garmin Connect account.

For more information about incident detection and assistance, go to garmin.com/safety.

Assistance: Allows you to send an automated message with your name, LiveTrack link, and GPS location to

your emergency contacts.

Incident detection: When the Forerunner device detects an incident during an outdoor walk, run, or bike activity,

the device sends an automated message, LiveTrack link, and GPS location to your emergency contacts.

LiveTrack: Allows friends and family to follow your races and training activities in real time. You can invite

followers using email or social media, allowing them to view your live data on a Garmin Connect tracking

page.

Live Event Sharing: Allows you to send messages to friends and family during an event, providing real-time

updates.

NOTE: This feature is available only if your device is connected to an Android smartphone.

Adding Emergency Contacts

Emergency contact phone numbers are used for the incident detection and assistance features.

1 From the Garmin Connect app, select or .

2 Select Safety & Tracking > Incident Detection & Assistance > Add Emergency Contact.

3 Follow the on-screen instructions.

Turning Incident Detection On and Off

1 From the watch face, hold UP.

2 Select > Safety > Incident Detection.

3 Select an activity.

NOTE: Incident detection is available only for outdoor walk, run, and bike activities.

When an incident is detected by your Forerunner device with GPS enabled, the Garmin Connect app can send

an automated text message and email with your name and GPS location to your emergency contacts. A

message appears indicating your contacts will be informed after 30 seconds have elapsed. You can select

Cancel before the countdown is complete to cancel the message.

Requesting Assistance

Before you can request assistance, you must set up emergency contacts (Adding Emergency Contacts,

page 16).

1 Hold the LIGHT key.

2 When you feel three vibrations, release the key to activate the assistance feature.

The countdown screen appears.

TIP: You can select Cancel before the countdown is complete to cancel the message.

16 Smart Features

Heart Rate Features

The Forerunner device has a wrist-based heart rate monitor and is also compatible with ANT+

chest heart rate

monitors. You can view wrist-based heart rate data on the heart rate widget. When both wrist-based heart rate

and ANT+ heart rate data are available, your device uses the ANT+ heart rate data.

Wrist-based Heart Rate

Wearing the Device

• Wear the device above your wrist bone.

NOTE: The device should be snug but comfortable. For more accurate heart rate readings, the device should

not move while running or exercising.

NOTE: The optical sensor is located on the back of the device.

• See Tips for Erratic Heart Rate Data, page 17 for more information about wrist-based heart rate.

• For more information about accuracy, go to garmin.com/ataccuracy.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try these tips.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under the device.

• Avoid scratching the heart rate sensor on the back of the device.

• Wear the device above your wrist bone. The device should be snug but comfortable.

• Warm up for 5 to 10 minutes and get a heart rate reading before starting your activity.

NOTE: In cold environments, warm up indoors.

• Rinse the device with fresh water after each workout.

Heart Rate Features 17

Viewing the Heart Rate Widget

The widget displays your current heart rate in beats per minute (bpm) and a graph of your heart rate for the last

4 hours.

1 From the watch face, select UP or DOWN to view the heart rate widget.

NOTE: You may need to add the widget to your widget loop (Customizing the Widget Loop, page 31).

2 Select START to view your average resting heart rate values for the last 7 days.

Broadcasting Heart Rate Data to Garmin Devices

You can broadcast your heart rate data from your Forerunner device and view it on paired Garmin devices.

NOTE: Broadcasting heart rate data decreases battery life.

1 From the heart rate widget, hold UP.

2 Select Options > Broadcast Heart Rate.

The Forerunner device starts broadcasting your heart rate data, and appears.

NOTE: You can view only the heart rate widget while broadcasting heart rate data from the heart rate widget.

3 Pair your Forerunner device with your Garmin ANT+ compatible device.

NOTE: The pairing instructions differ for each Garmin compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, select any key, and select Yes.

Broadcasting Heart Rate Data During an Activity

You can set up your Forerunner device to broadcast your heart rate data automatically when you begin an

activity. For example, you can broadcast your heart rate data to an Edge device while cycling, or to a VIRB

action camera during an activity.

NOTE: Broadcasting heart rate data decreases battery life.

1 From the heart rate widget, hold UP.

2 Select Options > Broadcast During Activity.

3 Begin an activity (Starting an Activity, page 4).

The Forerunner device starts broadcasting your heart rate data in the background.

NOTE: There is no indication that the device is broadcasting your heart rate data during an activity.

4 If necessary, pair your Forerunner device with your Garmin ANT+ compatible device.

NOTE: The pairing instructions differ for each Garmin compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, stop the activity.

18 Heart Rate Features

Setting an Abnormal Heart Rate Alert

CAUTION

This feature only alerts you when your heart rate exceeds or drops below a certain number of beats per minute,

as selected by the user, after a period of inactivity. This feature does not notify you of any potential heart

condition and is not intended to treat or diagnose any medical condition or disease. Always defer to your health

care provider for any heart-related issues.

You can set the heart rate threshold value.

1 From the heart rate widget, hold UP.

2 Select Options > Abnormal Heart Rate Alerts.

3 Select High Alert or Low Alert.

4 Set the heart rate threshold value.

Each time your heart rate exceeds or drops below the threshold value, a message appears and the device

vibrates.

Turning Off the Wrist-based Heart Rate Monitor

The default value for the Wrist Heart Rate setting is Auto. The device automatically uses the wrist-based heart

rate monitor unless you pair an ANT+ heart rate monitor to the device.

1 From the heart rate widget, hold UP.

2 Select Options > Status > Off.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase their cardiovascular strength and improve their

level of fitness. A heart rate zone is a set range of heartbeats per minute. The five commonly accepted heart

rate zones are numbered from 1 to 5 according to increasing intensity. Generally, heart rate zones are

calculated based on percentages of your maximum heart rate.

Fitness Goals

Knowing your heart rate zones can help you measure and improve your fitness by understanding and applying

these principles.

• Your heart rate is a good measure of exercise intensity.

• Training in certain heart rate zones can help you improve cardiovascular capacity and strength.

If you know your maximum heart rate, you can use the table (Heart Rate Zone Calculations, page 20) to

determine the best heart rate zone for your fitness objectives.

If you do not know your maximum heart rate, use one of the calculators available on the Internet. Some gyms

and health centers can provide a test that measures maximum heart rate. The default maximum heart rate is

220 minus your age.

Letting the Device Set Your Heart Rate Zones

The default settings allow the device to detect your maximum heart rate and set your heart rate zones as a

percentage of your maximum heart rate.

• Verify that your user profile settings are accurate (Setting Up Your User Profile, page 30).

• Run often with the wrist or chest heart rate monitor.

• View your heart rate trends using your Garmin Connect account.

Heart Rate Features 19

Setting Your Maximum Heart Rate

The device uses your user profile information from the initial setup to estimate your maximum heart rate and

determine your default heart rate zones. The default maximum heart rate is 220 minus your age. For the most

accurate calorie data during your activity, you should set your maximum heart rate (if known).

1 From the watch face, hold UP.

2 Select > User Profile > Max. HR.

3 Enter your maximum heart rate.

Customizing Your Heart Rate Zones and Maximum Heart Rate

You can customize your heart rate zones based on your training goals. The device uses your user profile

information from the initial setup to estimate your maximum heart rate and determine your default heart rate

zones. The default maximum heart rate is 220 minus your age. For the most accurate calorie data during your

activity, you should set your maximum heart rate (if known).

1 From the Garmin Connect app, select or .

2 Select Garmin Devices.

3 Select your device.

4 Select User Settings > Heart Rate Zones > Running Zones.

5 Enter your heart rate values for each zone.

6 Enter your maximum heart rate.

7 Select Save.

Heart Rate Zone Calculations

Zone

% of Maximum Heart

Rate

Perceived Exertion Benefits

1 50–60% Relaxed, easy pace, rhythmic breathing

Beginning-level aerobic training,

reduces stress

2 60–70%

Comfortable pace, slightly deeper

breathing, conversation possible

Basic cardiovascular training, good

recovery pace

3 70–80%

Moderate pace, more difficult to hold

conversation

Improved aerobic capacity, optimal

cardiovascular training

4 80–90%

Fast pace and a bit uncomfortable,

breathing forceful

Improved anaerobic capacity and

threshold, improved speed

5 90–100%

Sprinting pace, unsustainable for long

period of time, labored breathing

Anaerobic and muscular endurance,

increased power

Getting Your VO2 Max. Estimate for Running

This feature requires wrist-based heart rate or a compatible chest heart rate monitor. If you are using a chest

heart rate monitor, you must put it on and pair it with your device (Pairing Your ANT+ Sensors, page 28).

For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 30), and

set your maximum heart rate (Setting Your Maximum Heart Rate, page 20). The estimate may seem inaccurate

at first. The device requires a few runs to learn about your running performance.

1 Run for at least 10 minutes outdoors.

2 After your run, select Save.

A notification appears to display your first VO2 max. estimate and each time your VO2 max. increases.

20 Heart Rate Features

About VO2 Max. Estimates

VO2 max. is the maximum volume of oxygen (in milliliters) you can consume per minute per kilogram of body

weight at your maximum performance. In simple terms, VO2 max. is an indication of athletic performance and

should increase as your level of fitness improves. The Forerunner device requires wrist-based heart rate or a

compatible chest heart rate monitor to display your VO2 max. estimate.

On the device, your VO2 max. estimate appears as a number, description, and position on the color gauge. On

your Garmin Connect account, you can view additional details about your VO2 max. estimate, including your

fitness age. Your fitness age gives you an idea of how your fitness compares with a person of the same gender

and different age. As you exercise, your fitness age can decrease over time.

Purple

Superior

Blue

Excellent

Green

Good

Yellow

Fair

Red

Poor

VO2 max. data is provided by Firstbeat Analytics. VO2 max. analysis is provided with permission from The

Cooper Institute

. For more information, see the appendix (VO2 Max. Standard Ratings, page 44), and go to

www.CooperInstitute.org.

Recovery Time

You can use your Garmin device with wrist-based heart rate or a compatible chest heart rate monitor to display

how much time remains before you are fully recovered and ready for the next hard workout.

NOTE: This feature is available only on the Forerunner 45 Plus device.

NOTE: The recovery time recommendation uses your VO2 max. estimate and may seem inaccurate at first. The

device requires you to complete a few activities to learn about your performance.

The recovery time appears immediately following an activity. The time counts down until it is optimal for you to

attempt another hard workout.

Heart Rate Features 21

Viewing Your Recovery Time

For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 30), and

set your maximum heart rate (Setting Your Maximum Heart Rate, page 20).

1 Go for a run.

2 After your run, select Save.

The recovery time appears. The maximum time is 4 days.

NOTE: From the watch face, you can select UP or DOWN to view the performance widget, and select START

to scroll through the performance measurements to view your recovery time.

Viewing Your Predicted Race Times

NOTE: This feature is available only on the Forerunner 45 Plus device.

For the most accurate estimate, complete the user profile setup (Setting Up Your User Profile, page 30), and

set your maximum heart rate (Setting Your Maximum Heart Rate, page 20).

Your device uses the VO2 max. estimate (About VO2 Max. Estimates, page 21) and your training history to

provide a target race time. The device analyzes several weeks of your training data to refine the race time

estimates.

TIP: If you have more than one Garmin device, you can enable the Physio TrueUp

™

feature, which allows your

device to sync activities, history, and data from other devices (Syncing Activities, page 15).

1 From the watch face, select UP or DOWN to view the performance widget.

2 Select START to scroll through the performance measurements.

Your projected race times appear for 5K, 10K, half marathon, and marathon distances.

NOTE: The projections may seem inaccurate at first. The device requires a few runs to learn about your

running performance.

Heart Rate Variability and Stress Level

Stress level is the result of a three-minute test performed while standing still, where the Forerunner device

analyzes heart rate variability to determine your overall stress. Training, sleep, nutrition, and general life stress

all impact how a runner performs. The stress level range is from 1 to 100, where 1 is a very low stress state and

100 is a very high stress state. Knowing your stress level can help you decide if your body is ready for a tough

training run or yoga.

Using the Stress Level Widget

The stress level widget displays your current stress level and a graph of your stress level for the last several

hours. It can also guide you through a breathing activity to help you relax.

1 While you are sitting or inactive, select UP or DOWN to view the stress level widget.

2 Select START.

• If your stress level is in the low or medium range, a graph appears showing your stress level for the last

four hours.

TIP: To start a relaxation activity from the graph, select DOWN > START, and enter a duration in minutes.

• If your stress level is in the high range, a message appears asking you to begin a relaxation activity.

3 Select an option:

• View your stress level graph.

NOTE: Blue bars indicate periods of rest. Yellow bars indicate periods of stress. Gray bars indicate times

when you were too active to determine your stress level.

• Select Yes to start the relaxation activity, and enter a duration in minutes.

• Select No to bypass the relaxation activity and view the stress level graph.

22 Heart Rate Features

Body Battery

Your device analyzes your heart rate variability, stress level, sleep quality, and activity data to determine your

overall Body Battery level. Like a gas gauge on a car, it indicates your amount of available reserve energy. The

Body Battery level range is from 0 to 100, where 0 to 25 is low reserve energy, 26 to 50 is medium reserve

energy, 51 to 75 is high reserve energy, and 76 to 100 is very high reserve energy.

You can sync your device with your Garmin Connect account to view your most up-to-date Body Battery level,

long-term trends, and additional details (Tips for Improved Body Battery Data, page 25).

Heart Rate Features 23

Viewing the Body Battery Widget

The Body Battery widget displays your current Body Battery level and a graph of your Body Battery level for the

last several hours.

1 Select UP or DOWN to view the Body Battery widget.

NOTE: You may need to add the widget to your widget loop (Customizing the Widget Loop, page 31).

2 Select START to view a combined graph of your Body Battery and stress level.

Blue bars indicate periods of rest. Orange bars indicate periods of stress. Gray bars indicate times that you

were too active to determine your stress level.

3 Select DOWN to see your Body Battery data since midnight.

24 Heart Rate Features

Tips for Improved Body Battery Data

• Your Body Battery level updates when you sync your device with your Garmin Connect account.

• For more accurate results, wear the device while sleeping.

• Rest and good sleep charge your Body Battery.

• Strenuous activity, high stress, and poor sleep can cause your Body Battery to drain.

• Food intake, as well as stimulants like caffeine, has no impact on your Body Battery.

History

History includes time, distance, calories, average pace or speed, lap data, and optional sensor information.

NOTE: When the device memory is full, your oldest data is overwritten.

Viewing History

History contains previous activities you have saved on your device.

The device has a history widget for quick access to your activity data (Customizing the Widget Loop, page 31).

1 From the watch face, hold UP.

2 Select History.

3 Select This Week or Previous Weeks.

4 Select an activity.

5 Select DOWN to view additional details about the activity.

Deleting History

1 From the watch face, hold UP.

2 Select History > Options.

3 Select an option:

• Select Delete All Activities to delete all activities from the history.

• Select Reset Totals to reset all distance and time totals.

NOTE: This does not delete any saved activities.

Viewing Data Totals

You can view the accumulated distance and time data saved to your device.

1 From the watch face, hold UP.

2 Select History > Totals.

3 If necessary, select an activity.

4 Select an option to view weekly or monthly totals.

Data Management

NOTE: The device is not compatible with Windows

95, 98, Me, Windows NT

, and Mac

OS 10.3 and earlier.

History 25

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your device memory contains important system files

that should not be deleted.

1 Open the Garmin drive or volume.

2 If necessary, open a folder or volume.

3 Select a file.

4 Press the Delete key on your keyboard.

NOTE: If you are using an Apple

computer, you must empty the Trash folder to completely remove the files.

Disconnecting the USB Cable

If your device is connected to your computer as a removable drive or volume, you must safely disconnect your

device from your computer to avoid data loss. If your device is connected to your Windows computer as a

portable device, it is not necessary to safely disconnect the device.

1 Complete an action:

• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your

device.

• For Apple computers, select the device, and select File > Eject.

2 Disconnect the cable from your computer.

26 History

Garmin Connect

You can connect with your friends on Garmin Connect. Garmin Connect gives you the tools to track, analyze,

share, and encourage each other. Record the events of your active lifestyle, including runs, walks, rides, hikes,

and more. To sign up for a free account, go to www.garminconnect.com.

Store your activities: After you complete and save an activity with your device, you can upload that activity to

your Garmin Connect account and keep it as long as you want.

Analyze your data: You can view more detailed information about your activity, including time, distance,

elevation, heart rate, calories burned, an overhead map view, pace and speed charts, and customizable

reports.

Plan your training: You can choose a fitness goal and load one of the day-by-day training plans.

Track your progress: You can track your daily steps, join a friendly competition with your connections, and

meet your goals.

Share your activities: You can connect with friends to follow each other's activities or post links to your

activities on your favorite social networking sites.

Manage your settings: You can customize your device and user settings on your Garmin Connect account.

Syncing Your Data with the Garmin Connect App

Your device periodically syncs data with the Garmin Connect app automatically. You can also manually sync

your data at any time.

1 Bring the device within 3 m (10 ft.) of your smartphone.

2 From any screen, hold LIGHT to view the controls menu.

3 Select .

4 View your current data in the Garmin Connect app.

History 27

Using Garmin Connect on Your Computer

The Garmin Express

™

application connects your device to your Garmin Connect account using a computer. You

can use the Garmin Express application to upload your activity data to your Garmin Connect account and to

send data, such as workouts or training plans, from the Garmin Connect website to your device.

1 Connect the device to your computer using the USB cable.

2 Go to www.garmin.com/express.

3 Download and install the Garmin Express application.

4 Open the Garmin Express application, and select Add Device.

5 Follow the on-screen instructions.

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more information about compatibility and purchasing

optional sensors, go to http://buy.garmin.com.

Pairing Your ANT+ Sensors

The first time you connect a wireless sensor to your device using ANT+ technology, you must pair the device

and sensor. After they are paired, the device connects to the sensor automatically when you start an activity

and the sensor is active and within range.

1 Install the sensor or put on the heart rate monitor. The heart rate monitor does not send or receive data until

you put it on.

2 Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors while pairing.

3 From the watch face, hold UP.

4 Select > Sensors & Accessories > Add New.

5 Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your device, the sensor status changes from Searching to Connected. Sensor

data appears in the data screen loop or a custom data field.

Foot Pod

Your device is compatible with the foot pod. You can use the foot pod to record pace and distance instead of

using GPS when you are training indoors or when your GPS signal is weak. The foot pod is on standby and

ready to send data (like the heart rate monitor).

After 30 minutes of inactivity, the foot pod powers off to conserve the battery. When the battery is low, a

message appears on your device. Approximately five hours of battery life remain.

Going for a Run Using a Foot Pod

Before you go for a run, you must pair the foot pod with your Forerunner device (Pairing Your ANT+ Sensors,

page 28).

You can run indoors using a foot pod to record pace, distance, and cadence. You can also run outdoors using a

foot pod to record cadence data with your GPS pace and distance.

1 Install your foot pod according to the accessory instructions.

2 Select a running activity.

3 Go for a run.

28 ANT+ Sensors

Foot Pod Calibration

The foot pod is self-calibrating. The accuracy of the speed and distance data improves after a few outdoor runs

using GPS.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS signals and pair your device with the foot pod

(Pairing Your ANT+ Sensors, page 28).

The foot pod is self-calibrating, but you can improve the accuracy of the speed and distance data with a few

outdoor runs using GPS.

1 Stand outside for 5 minutes with a clear view of the sky.

2 Start a running activity.

3 Run on a track without stopping for 10 minutes.

4 Stop your activity, and save it.

Based on the recorded data, the foot pod calibration value changes, if necessary. You should not need to

calibrate the foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device with the foot pod sensor (Pairing Your ANT+

Sensors, page 28).

Manual calibration is recommended if you know your calibration factor. If you have calibrated a foot pod with

another Garmin product, you may know your calibration factor.

1 From the watch face, hold UP.

2 Select > Sensors & Accessories.

3 Select your foot pod.

4 Select Cal. Factor > Set Value.

5 Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you must pair your device with the foot pod sensor

(Pairing Your ANT+ Sensors, page 28).

You can set your device to calculate speed and distance using your foot pod data instead of GPS data.

1 From the watch face, hold UP.

2 Select > Sensors & Accessories.

3 Select your foot pod.

4 Select Speed or Distance.

5 Select an option:

• Select Indoor when you are training with GPS turned off, usually indoors.

• Select Always to use your foot pod data regardless of the GPS setting.

Using an Optional Bike Speed or Cadence Sensor

You can use a compatible bike speed or cadence sensor to send data to your device.

• Pair the sensor with your device (Pairing Your ANT+ Sensors, page 28).

• Set your wheel size (Wheel Size and Circumference, page 45).

• Go for a ride (Starting an Activity, page 4).

ANT+ Sensors 29

Customizing Your Device

Setting Up Your User Profile

You can update your height, weight, birth year, gender, and maximum heart rate settings (Setting Your Maximum

Heart Rate, page 20). The device uses this information to calculate training data.

1 From the watch face, hold UP.

2 Select > User Profile.

3 Select an option.

Activity Options

Activity options are a collection of settings that optimize your device based on how you are using it. For

example, the settings and data screens are different when you are using the device for running than for riding

your bike.

When you are using an activity and you change settings such as data fields or alerts, the changes are saved

automatically as part of the activity.

Customizing Your Activity Options

You can customize your settings, data fields, and more for a particular activity.

1 From the watch face, select START.

2 Select an activity.

3 Select Options.

4 Select an option:

NOTE: Not all options are available for all activities.

• Select Workouts to do, view, or edit a workout (Following a Workout, page 5).

• Select Data Screens to customize the data screens and data fields (Customizing the Data Fields,

page 31).

• Select Alerts to customize your training alerts (Alerts, page 31).

• Select Laps to set how laps are triggered (Marking Laps by Distance, page 32).

• Select Auto Pause to change when the activity timer automatically pauses (Using the Auto Pause

Feature, page 32).

• Select GPS to turn off GPS (Training Indoors, page 8) or change the satellite setting (Changing the GPS

Setting, page 33).

• Select Self Evaluation to customize how often you evaluate your perceived effort for the activity (Enabling

Self Evaluation, page 32).

All changes are saved to the activity.

Changing Your Displayed Activities

Your device has default activities, such as Run and Bike. You can select additional activities to display on the

device.

1 From the Garmin Connect app, select or .

2 Select Garmin Devices.

3 Select your device.

4 Select Activity Options > Displayed Activities > Edit.

5 Select the activities to display on your device.

6 Select Done.

Sync your device with the Garmin Connect app to view the updated activities (Manually Syncing Data with

Garmin Connect, page 12).

30 Customizing Your Device

Customizing the Data Fields

You can customize data fields based on your training goals or optional accessories. For example, you can

customize data fields to display your lap pace and heart rate zone.

1 Select START, and select an activity profile.

2 Select Options > Data Screens.

3 Select a page.

4 Select a data field to change it.

Customizing the Widget Loop

You can change the order of widgets in the widget loop, remove widgets, and add new widgets.

1 From the watch face, hold UP.

2 Select > Widgets.

3 Select a widget.

4 Select an option:

• Select Reorder to change the location of the widget in the widget loop.

• Select Remove to remove the widget from the widget loop.

5 Select Add Widgets.

6 Select a widget.

The widget is added to the widget loop.

Alerts

You can use alerts to train toward specific heart rate, time, distance, calories, and pace goals and to set run/

walk time intervals.

Setting a Recurring Alert

A recurring alert notifies you each time the device records a specified value or interval. For example, you can

set the device to alert you every 30 minutes.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Alerts > Add New.

4 Select Time, Distance, or Calories.

5 Turn on the alert.

6 Select or enter a value.

Each time you reach the alert value, a message appears. The device also beeps or vibrates if audible tones are

turned on (Setting the Device Sounds, page 35).

Setting Your Heart Rate Alerts

You can set the device to alert you when your heart rate is above or below a target zone or a custom range. For

example, you can set the device to alert you when your heart rate is below 150 beats per minute (bpm).

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Alerts > Add New > Heart Rate.

4 Select an option:

• To use the range of an existing heart rate zone, select a heart rate zone.

• To customize the maximum value, select Custom > High, and enter a value.

• To customize the minimum value, select Custom > Low, and enter a value.

Each time you exceed or drop below the specified range or custom value, a message appears. The device also

beeps or vibrates if audible tones are turned on (Setting the Device Sounds, page 35).

Customizing Your Device 31

Marking Laps by Distance

You can set your device to use the Auto Lap

feature, which marks a lap automatically at every kilometer or

mile. You can also mark laps manually. This feature is helpful for comparing your performance during different

parts of an activity.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Laps > Auto Lap.

Each time you complete a lap, a message appears that displays the time for that lap. The device also beeps or

vibrates if audible tones are turned on (Setting the Device Sounds, page 35). The Auto Lap feature stays on for

the selected activity profile until you turn it off.

If necessary, you can customize the data screens to display additional lap data (Customizing the Data Fields,

page 31).

Turning on the Lap Key

You can customize BACK to function as a lap key during timed activities.

1 Select START, and select an activity profile.

2 Select Options > Laps > Lap Key.

The lap key stays on for the selected activity profile until you turn off the lap key.

Using the Auto Pause

Feature

You can use the Auto Pause feature to pause the activity timer automatically when you stop moving. This

feature is helpful if your activity includes stop lights or other places where you need to stop.

NOTE: History is not recorded while the timer is stopped or paused.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > Auto Pause > When Stopped.

The Auto Pause feature stays on for the selected activity until you turn it off.

Enabling Self Evaluation

When you save an activity, you can evaluate your perceived effort and how you felt during the activity

(Evaluating an Activity, page 4). You can view your evaluation information in your Garmin Connect account.

1 From the watch face, select START

2 Select an activity.

NOTE: This feature is not available for all activities.

3 Select Options > Self Evaluation.

4 Select an option:

• To evaluate only following a structured workout or interval, select Workouts Only.

• To evaluate after every activity, select Always.

32 Customizing Your Device

Changing the GPS Setting

By default, the device uses GPS to locate satellites. For more information about GPS, go to www.garmin.com

/aboutGPS.

1 From the watch face, select START.

2 Select an activity.

3 Select Options > GPS.

4 Select an option:

• Select GPS Only to enable the GPS satellite system.

• Select GPS + GLONASS (Russian satellite system) for more accurate position information in situations

with poor sky visibility.

• Select GPS + GALILEO (European Union satellite system) for more accurate position information in

situations with poor sky visibility.

NOTE: Using GPS and another satellite together can reduce battery life more quickly than using GPS only

(GPS and Other Satellite Systems, page 33).

GPS and Other Satellite Systems

Using GPS and another satellite system together offers increased performance in challenging environments

and faster position acquisition than using GPS only. However, using multiple systems can reduce battery life

more quickly than using GPS only.

Your device can use these Global Navigation Satellite Systems (GNSS).

GPS: A satellite constellation built by the United States.

GLONASS: A satellite constellation built by Russia.

GALILEO: A satellite constellation built by the European Space Agency.

Activity Tracking Settings

From the watch face, hold UP, and select > Activity Tracking.

Status: Turns off the activity tracking features.

Move Alert: Displays a message and the move bar on the digital watch face and steps screen. The device also

beeps or vibrates if audible tones are turned on (Setting the Device Sounds, page 35).

Goal Alerts: Allows you to turn on and off goal alerts, or turn them off only during activities. Goal alerts appear

for your daily steps goal and weekly intensity minutes goal.

Move IQ: Allows your device to automatically start and save a timed walking or running activity when the Move

IQ feature detects familiar movement patterns.

Turning Off Activity Tracking

When you turn off activity tracking, your steps, intensity minutes, sleep tracking, and Move IQ events are not

recorded.

1 From the watch face, hold UP.

2 Select > Activity Tracking > Status > Off.

Watch Face Settings

You can customize the appearance of the watch face by selecting the layout and accent color. You can also

download custom watch faces from the Connect IQ

™

store.

Customizing Your Device 33

Customizing the Watch Face

You can customize the watch face information and appearance.

1 From the watch face, hold UP.

2 Select Watch Face.

3 Select UP or DOWN to preview the watch face options.

4 Select START.

5 Select Accent Color to change the accent color (optional).

6 Select Apply.

Downloading Connect IQ Features

Before you can download features from the Connect IQ app, you must pair your Forerunner device with your

smartphone (Pairing Your Smartphone with Your Device, page 2).

1 From the app store on your smartphone, install and open the Connect IQ app.

2 If necessary, select your device.

3 Select a Connect IQ feature.

4 Follow the on-screen instructions.

Downloading Connect IQ Features Using Your Computer

1 Connect the device to your computer using a USB cable.

2 Go to apps.garmin.com, and sign in.

3 Select a Connect IQ feature, and download it.

4 Follow the on-screen instructions.

System Settings

Hold UP, and select > System.

Language: Sets the language displayed on the device.

Time: Adjusts the time settings (Time Settings, page 34).

Backlight: Adjusts the backlight settings (Changing the Backlight Settings, page 35).

Sounds: Sets the device sounds, such as key tones, alerts, and vibrations (Setting the Device Sounds,

page 35).

Do Not Disturb: Turns on or off do not disturb mode. You can use the Sleep Time option to turn on do not

disturb mode automatically during your normal sleep hours. You can set your normal sleep hours on your

Garmin Connect account (Using Do Not Disturb Mode, page 11).

Units: Sets the units of measure used on the device (Changing the Units of Measure, page 35).

Format: Sets the device to display Pace/Speed Preference for running, cycling, or other activities. This

preference affects several training options, history, and alerts (Displaying Pace or Speed, page 35) You can

also change the Start of Week setting.

Software Update: Allows you to install software updates downloaded using Garmin Express or the Garmin

Connect app (Updating the Software Using the Garmin Connect App, page 39).

Reset: Allows you to reset user data and settings (Resetting All Default Settings, page 41).

Time Settings

Hold UP, and select > System > Time.

Time Format: Sets the device to show time in a 12-hour or a 24-hour format.

Set Time: Allows you to set the time manually or automatically based on your paired mobile device or GPS

location.

34 Customizing Your Device

Time Zones

Each time you turn on the device and acquire satellites or sync with your smartphone, the device automatically

detects your time zone and the current time of day.

Changing the Backlight Settings

1 From the watch face, hold UP.

2 Select > System > Backlight.

3 Select an option:

• Select During Activity.

• Select Not During Activity.

4 Select an option:

• Select Keys to turn on the backlight for key presses.

• Select Alerts to turn on the backlight for alerts.

• Select Gesture to turn on the backlight by raising and turning your arm to look at your wrist.

• Select Timeout to set the length of time before the backlight turns off.

Setting the Device Sounds

You can set the device to sound a tone or vibration when keys are selected or when an alert is triggered.

1 From the watch face, hold UP.

2 Select > System > Sounds.

3 Select an option:

• Select Key Tones to turn the key tones on and off.

• Select Alert Tones to enable the alert tones settings.

• Select Vibration to turn device vibration on and off.

• Select Key Vibe to enable vibration when you select a key.

Displaying Pace or Speed

You can change the type of information that appears in your activity summary and history.

1 From the watch face, hold UP.

2 Select > System > Format > Pace/Speed Preference.

3 Select an activity.

Changing the Units of Measure

You can customize units of measure for distance.

1 From the watch face, hold UP.

2 Select > System > Units.

3 Select Miles or Kilometers.

Clock

Setting the Time Manually

1 From the watch face, hold UP.

2 Select > System > Time > Set Time > Manual.

3 Select Time, and enter the time of day.

Customizing Your Device 35

Setting an Alarm

You can set multiple alarms. You can set each alarm to sound once or to repeat regularly.

1 From the watch face, hold UP.

2 Select Alarm Clock > Add Alarm.

3 Select Time, and enter the alarm time.

4 Select Repeat, and select when the alarm should repeat (optional).

5 Select Sounds, and select a type of notification (optional).

6 Select Backlight > On to turn on the backlight with the alarm.

7 Select Label, and select a description for the alarm (optional).

Deleting an Alarm

1 From the watch face, hold UP.

2 Select Alarm Clock.

3 Select an alarm.

4 Select Delete.

Starting the Countdown Timer

1 From any screen, hold LIGHT.

2 Select Timer.

3 Enter the time.

4 If necessary, select Restart > On to automatically restart the timer after it expires.

5 If necessary, select Sounds, and select a type of notification.

6 Select Start Timer.

Using the Stopwatch

1 From any screen, hold LIGHT.

2 Select Stopwatch.

3 Select START to start the timer.

4 Select BACK to restart the lap timer .

The total stopwatch time continues running.

5 Select START to stop both timers.

6 Select an option.

7 Save the recorded time as an activity in your history (optional).

36 Customizing Your Device

Device Information

Viewing Device Information

You can view device information, such as the unit ID, software version, regulatory information, and license

agreement.

1 From the watch face, hold UP.

2 Select > About.

Charging the Device

WARNING

This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the

product box for product warnings and other important information.

NOTICE

To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or

connecting to a computer. Refer to the cleaning instructions (Device Care, page 38).

1 Plug the small end of the USB cable into the charging port on your device.

2 Plug the large end of the USB cable into a USB charging port.

3 Charge the device completely.

Tips for Charging the Device

1 Connect the charger securely to the device to charge it using the USB cable (Charging the Device, page 37).

You can charge the device by plugging the USB cable into a Garmin approved AC adapter with a standard

wall outlet or a USB port on your computer. Charging a fully depleted battery takes up to two hours.

2 Remove the charger from the device after the battery charge level reaches 100%.

Device Information 37

Device Care

NOTICE

Avoid extreme shock and harsh treatment, because it can degrade the life of the product.

Avoid pressing the keys under water.

Do not use a sharp object to clean the device.

Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.

Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics,

alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause

permanent damage.

Cleaning the Device

NOTICE

Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a

charger. Corrosion can prevent charging and data transfer.

1 Wipe the device using a cloth dampened with a mild detergent solution.

2 Wipe it dry.

After cleaning, allow the device to dry completely.

TIP: For more information, go to www.garmin.com/fitandcare.

Changing the Bands

You can replace the bands with new Forerunner bands.

1 Use a screwdriver to loosen the screws.

2 Remove the screws.

3 Gently remove the bands.

4 Align the new bands.

5 Replace the screws using the screwdriver.

38 Device Information

Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life

Up to 7 days for watch mode with smart notifications, activity tracking, and

wrist heart rate

Up to 13 hr. in GPS mode

Operating temperature range From -20º to 60ºC (from -4º to 140ºF)

Charging temperature range From 0º to 45ºC (from 32º to 113ºF)

Wireless frequency 2.4 GHz @ +6 dBm nominal

Water rating Swim, 5 ATM

Troubleshooting

Product Updates

On your computer, install Garmin Express (www.garmin.com/express). On your smartphone, install the Garmin

Connect app.

This provides easy access to these services for Garmin devices:

• Data uploads to Garmin Connect

• Product registration

Updating the Software Using the Garmin Connect App

Before you can update your device software using the Garmin Connect app, you must have a Garmin Connect

account, and you must pair the device with a compatible smartphone (Pairing Your Smartphone with Your

Device, page 2).

Sync your device with the Garmin Connect app (Manually Syncing Data with Garmin Connect, page 12).

When new software is available, the Garmin Connect app automatically sends the update to your device.

The update is applied when you are not actively using the device. When the update is complete, your device

restarts.

Setting Up Garmin Express

1 Connect the device to your computer using a USB cable.

2 Go to www.garmin.com/express.

3 Follow the on-screen instructions.

Updating the Software Using Garmin Express

Before you can update your device software, you must have a Garmin Connect account, and you must

download the Garmin Express application.

1 Connect the device to your computer using the USB cable.

When new software is available, Garmin Express sends it to your device.

2 Follow the on-screen instructions.

3 Do not disconnect your device from the computer during the update process.

Getting More Information

• Go to support.garmin.com for additional manuals, articles, and software updates.

• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and

replacement parts.

The device withstands pressure equivalent to a depth of 50 m. For more information, go to www.garmin.com/waterrating.

Troubleshooting 39

Activity Tracking

For more information about activity tracking accuracy, go to garmin.com/ataccuracy.

My daily step count does not appear

The daily step count is reset every night at midnight.

If dashes appear instead of your step count, allow the device to acquire satellite signals and set the time

automatically.

My step count does not seem accurate

If your step count does not seem accurate, you can try these tips.

• Wear the device on your non-dominant wrist.

• Carry the device in your pocket when pushing a stroller or lawn mower.

• Carry the device in your pocket when actively using your hands or arms only.

NOTE: The device may interpret some repetitive motions, such as washing dishes, folding laundry, or

clapping your hands, as steps.

The step counts on my device and my Garmin Connect account don't match

The step count on your Garmin Connect account updates when you sync your device.

1 Select an option:

• Sync your step count with the Garmin Connect application (Using Garmin Connect on Your Computer,

page 28).

• Sync your step count with the Garmin Connect app (Manually Syncing Data with Garmin Connect,

page 12).

2 Wait while the device syncs your data.

Syncing can take several minutes.

NOTE: Refreshing the Garmin Connect app or the Garmin Connect application does not sync your data or

update your step count.

My intensity minutes are flashing

When you exercise at an intensity level that qualifies toward your intensity minutes goal, the intensity minutes

flash.

Exercise for at least 10 consecutive minutes at a moderate or vigorous intensity level.

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite signals. The time and date are set automatically

based on the GPS position.

TIP: For more information about GPS, go to www.garmin.com/aboutGPS.

1 Go outdoors to an open area.

The front of the device should be oriented toward the sky.

2 Wait while the device locates satellites.

It may take 30–60 seconds to locate satellite signals.

40 Troubleshooting

Improving GPS Satellite Reception

• Frequently sync the device to your Garmin Connect account:

◦ Connect your device to a computer using the USB cable and the Garmin Express application.

◦ Sync your device to the Garmin Connect app using your Bluetooth enabled smartphone.

While connected to your Garmin Connect account, the device downloads several days of satellite data,

allowing it to quickly locate satellite signals.

• Take your device outside to an open area away from tall buildings and trees.

• Remain stationary for a few minutes.

Restarting the Device

If the device stops responding, you may need to restart it.

NOTE: Restarting the device may erase your data or settings.

1 Hold LIGHT for 15 seconds.

The device turns off.

2 Hold LIGHT for one second to turn on the device.

Resetting All Default Settings

NOTE: This deletes all user-entered information and activity history.

1 From the watch face, hold UP.

2 Select > System > Reset.

3 Select an option:

• To reset all of the device settings to the factory default values and save all activity information, select

Reset Settings.

• To delete all activities from your history, select Delete All.

My device is in the wrong language

1 From the watch face, hold UP.

2 Scroll down to the second-to-last item in the list, and select it.

3 Select the first item in the list.

4 Select your language.

Is my smartphone compatible with my device?

The Forerunner device is compatible with smartphones using Bluetooth wireless technology.

Go to www.garmin.com/ble for compatibility information.

Troubleshooting 41

My phone will not connect to the device

If your phone will not connect to the device, you can try these tips.

• Turn off your smartphone and your device, and turn them back on again.

• Enable Bluetooth technology on your smartphone.

• Update the Garmin Connect app to the latest version.

• Remove your device from the Garmin Connect app and the Bluetooth settings on your smartphone to retry

the pairing process.

• If you bought a new smartphone, remove your device from the Garmin Connect app on the smartphone you

intend to stop using.

• Bring your smartphone within 10 m (33 ft.) of the device.

• On your smartphone, open the Garmin Connect app, select or , and select Garmin Devices > Add

Device to enter pairing mode.

• Select UP > > Phone > Pair Phone.

Can I use the cardio activity outdoors?

You can use the cardio activity and turn on GPS for outdoor use.

1 Select START > Cardio > Options > GPS.

2 Select an option.

3 Go outside, and wait while the device locates satellites.

4 Select START to start the activity timer.

GPS stays on for the selected activity until you turn it off.

Tips for Existing Garmin Connect Users

1 From the Garmin Connect app, select or .

2 Select Garmin Devices > Add Device.

Maximizing Battery Life

You can do several things to extend the life of the battery.

• Reduce the backlight timeout (Changing the Backlight Settings, page 35).

• Turn off Bluetooth wireless technology when you are not using connected features (Turning Off the Bluetooth

Smartphone Connection, page 15).

• Turn off activity tracking (Activity Tracking Settings, page 33).

• Use a watch face that is not updated every second.

For example, use a watch face without a second hand (Customizing the Watch Face, page 34).

• Limit the smartphone notifications the device displays (Managing Notifications, page 14).

• Stop broadcasting heart rate data to paired Garmin devices (Broadcasting Heart Rate Data to Garmin Devices,

page 18).

• Turn off wrist-based heart rate monitoring (Turning Off the Wrist-based Heart Rate Monitor, page 19).

NOTE: Wrist-based heart rate monitoring is used to calculate vigorous intensity minutes and calories burned.

42 Troubleshooting

How can I manually pair ANT+ sensors?

You can use the device settings to manually pair ANT+ sensors. The first time you connect a sensor to your

device using ANT+ wireless technology, you must pair the device and sensor. After they are paired, the device

connects to the sensor automatically when you start an activity and the sensor is active and within range.

1 Stay 10 m (33 ft.) away from other ANT+ sensors while pairing.

2 If you are pairing a heart rate monitor, put on the heart rate monitor.

The heart rate monitor does not send or receive data until you put it on.

3 Hold UP.

4 Select > Sensors & Accessories > Add New.

5 Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your device, a message appears. Sensor data appears in the data page loop

or a custom data field.

Appendix

Data Fields

Some data fields require ANT+ accessories to display data.

Average Pace: The average pace for the current activity.

Average Speed: The average speed for the current activity.

Cadence: Running. The steps per minute (right and left).

Cadence: Cycling. The number of revolutions of the crank arm. Your device must be connected to a cadence

accessory for this data to appear.

Calories: The amount of total calories burned.

Distance: The distance traveled for the current track or activity.

Heart Rate: Your heart rate in beats per minute (bpm). Your device must have wrist-based heart rate or be

connected to a compatible heart rate monitor.

HR Zone: The current range of your heart rate (1 to 5). The default zones are based on your user profile and

maximum heart rate (220 minus your age).

Lap Distance: The distance traveled for the current lap.

Lap Pace: The average pace for the current lap.

Lap Speed: The average speed for the current lap.

Lap Time: The stopwatch time for the current lap.

Pace: The current pace.

Speed: The current rate of travel.

Steps: The number of steps during the current activity.

Time of Day: The time of day based on your current location and time settings (format, time zone, daylight

saving time).

Timer: The stopwatch time for the current activity.

Appendix 43

VO2 Max. Standard Ratings

These tables include standardized classifications for VO2 max. estimates by age and gender.

Males Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 55.4 54 52.5 48.9 45.7 42.1

Excellent 80 51.1 48.3 46.4 43.4 39.5 36.7

Good 60 45.4 44 42.4 39.2 35.5 32.3

Fair 40 41.7 40.5 38.5 35.6 32.3 29.4

Poor 0–40 <41.7 <40.5 <38.5 <35.6 <32.3 <29.4

Females Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 49.6 47.4 45.3 41.1 37.8 36.7

Excellent 80 43.9 42.4 39.7 36.7 33 30.9

Good 60 39.5 37.8 36.3 33 30 28.1

Fair 40 36.1 34.4 33 30.1 27.5 25.9

Poor 0–40 <36.1 <34.4 <33 <30.1 <27.5 <25.9

Data reprinted with permission from The Cooper Institute. For more information, go to

www.CooperInstitute.org.

44 Appendix

Wheel Size and Circumference

Your speed sensor automatically detects your wheel size. If necessary, you can manually enter your wheel

circumference in the speed sensor settings.

The tire size is marked on both sides of the tire. This is not a comprehensive list. You can also measure the

circumference of your wheel or use one of the calculators available on the internet.

Tire Size Wheel Circumference (mm)

20 × 1.75 1515

20 × 1-3/8 1615

22 × 1-3/8 1770

22 × 1-1/2 1785

24 × 1 1753

24 × 3/4 Tubular 1785

24 × 1-1/8 1795

24 × 1.75 1890

24 × 1-1/4 1905

24 × 2.00 1925

24 × 2.125 1965

26 × 7/8 1920

26 × 1-1.0 1913

26 × 1 1952

26 × 1.25 1953

26 × 1-1/8 1970

26 × 1.40 2005

26 × 1.50 2010

26 × 1.75 2023

26 × 1.95 2050

26 × 2.00 2055

26 × 1-3/8 2068

26 × 2.10 2068

26 × 2.125 2070

26 × 2.35 2083

26 × 1-1/2 2100

26 × 3.00 2170

27 × 1 2145

27 × 1-1/8 2155

Appendix 45

Tire Size Wheel Circumference (mm)

27 × 1-1/4 2161

27 × 1-3/8 2169

29 x 2.1 2288

29 x 2.2 2298

29 x 2.3 2326

650 x 20C 1938

650 x 23C 1944

650 × 35A 2090

650 × 38B 2105

650 × 38A 2125

700 × 18C 2070

700 × 19C 2080

700 × 20C 2086

700 × 23C 2096

700 × 25C 2105

700C Tubular 2130

700 × 28C 2136

700 × 30C 2146

700 × 32C 2155

700 × 35C 2168

700 × 38C 2180

700 × 40C 2200

700 × 44C 2235

700 × 45C 2242

700 × 47C 2268

46 Appendix

Index

accessories 28, 39, 43

activities 4

custom 5

saving 4, 32

starting 4

activity 25

activity tracking 10, 11, 15, 30, 33

alarms 36

alerts 15, 30, 31, 33, 35

heart rate 19

ANT+ sensors 28

pairing 28

applications 12, 16

smartphone 2

assistance 16

Auto Lap 32

Auto Pause 32

backlight 1, 35

bands 38

battery

charging 37

maximizing 15, 42

bike sensors 29

Bluetooth technology 12, 14–16, 41

Body Battery 13, 23–25

cadence, sensors 29

calendar 6

calorie, alerts 31

charging 37

cleaning the device 38

clock 1, 34, 36

Connect IQ 34

connecting 15

contacts, adding 16

controls menu 2

countdown timer 36

customizing the device 31

data

storing 27, 28

transferring 27, 28

uploading 12

data fields 30, 31, 35, 43

deleting

all user data 26

history 25

personal records 9

distance 25

alerts 31

measuring 35

emergency contacts 16

foot pod 2, 28, 29

Galileo 33

Garmin Connect 2, 4–6, 12, 15, 16, 27, 39

storing data 28

Garmin Express 39

GLONASS 33

GPS 2, 33, 42

settings 33

signal 4, 40, 41

stopping 8

heart rate 2, 13, 17, 18

alerts 19, 31

monitor 17, 19–22

pairing sensors 18

zones 19, 20, 30

history 25, 27

deleting 25

sending to computer 27, 28

icons 2

incident detection 16

indoor training 8, 9, 28

intensity minutes 11, 40

intervals 8

workouts 7, 8

keys 1, 32, 38

language 41

laps 1, 25, 30, 32

LiveTrack 16

main menu, customizing 31

menu 1

Move IQ 33

music, playing 14

music controls 14

notifications 14

outdoor training 42

pace 35

pairing 42

ANT+ sensors 18, 43

smartphone 2, 42

pairing ANT+ sensors 28

personal records 9, 25

deleting 9

profiles 30

activity 3, 30

user 30

projected finish time 22

recovery 21, 22

resetting the device 41

safety information 16

satellite signals 33, 40, 41

saving activities 3

screen 35

settings 31, 33–35, 41

device 14, 15

sharing data 15

shortcuts 2

sleep mode 11

smartphone 13, 15, 16, 34, 41

applications 12

apps 15

pairing 2, 42

software

license 37

updating 39

version 37

specifications 39

speed, zones 35

speed and cadence sensors 29

statistics 25

stopwatch 36

stress level 13, 22–24

stress score 23, 24

system settings 34

time 35

alerts 31

settings 34

time of day 34

time zones 35

timer 1, 3, 25

countdown 36

tones 35, 36

tracking 16

training 3, 7, 12, 32

calendar 6, 7

plans 4, 6, 7

treadmill 9

troubleshooting 17, 25, 37, 39–42

UltraTrac 33

unit ID 37

units of measure 35

updates, software 39

uploading data 12

USB 39

disconnecting 26

user data, deleting 26

user profile 15, 30

vibration 35

VO2 max. 20–22, 44

walking intervals 8

watch faces 33, 34

watch mode 42

weather 13

wheel sizes 45

widgets 13, 18, 19, 22–25

workouts 4–7, 30

creating 5

loading 5

zones

heart rate 19, 20, 30

speed 35

time 35

Index 47

support.garmin.com

GUID-B13F60F2-C67C-46A2-B03F-8F8FD01EF80A v6May 2021

Garmin 010-02156-12 Forerunner 45S

Product's Documents

User Manual

Specifications

Garmin 010-02156-12 Questions and Answers