Loading ...
Loading ...
Loading ...
10. MAINTENANCE
10.1 CLEARING OBSTRUCTIONS IN
THE IMPELLER HOUSING – FIG.13
WARNING: For your own safety, remove plug from
power supply before maintaining your submersible
pump.
- If the impeller becomes blocked or obstructed,
remove base plate by removing the screws.
- DO NOT lever the impeller as this will cause
damage due to its brittle construction.
- Take note of the orientation and order with which
the components were removed to ensure the
correct re-assembly.
- Rinse with clean water to flush.
NOTE: This pump is fitted with an overload safety
device. In the event of the motor overheating, the
device will automatically switch off. Allow to cool for
20 minutes before attempting to restart.
FIG.13
- 18 -
Loading ...
Loading ...
Loading ...