Loading ...
Loading ...
Loading ...
GENERAL TROUBLESHOOTING
The unit is not cutting level.
• Level deck. Check air pressure of all tires; make sure they are equal. See
tires for maximum inflation.
• Without the engine running, make certain blades are installed identically.
The engine will not start.
• Disengage blades, turn key switch to the "OFF" position, check battery and
all other electrical connections and inspect spark plug and wire.
• Contact engine manufacturer or qualified mechanic.
Engine runs poorly.
• See engine manual.
• Check the throttle adjuster.
• Replace fuel, clean fuel filter and fuel line.
• Check spark plug and gap.
Cutter bounces excessively while towing.
• Lower tire pressure.
• Tow at a lower speed.
-)
IF PROBLEMS PERSIST HAVE A QUALIFIED MECHANIC SERVICE ]
THE CUTTER. NEVER ATTEMPT TO MAKE AN ADJUSTMENT THAT]
i
YOU ARE NOT SURE IS CORRECT. DOING SO CAN CAUSE OTHER /
PROBLEMS. 3
9
Loading ...
Loading ...
Loading ...