Loading ...
Loading ...
Loading ...
Installation Instructions
D INSTALL AND CONNECT THE CASE
1. Removethe front case panel and pull
the unit out of the case.Placethe empty case onto
the platform inthe closetwith the outdoor sidefacing
the wall plenum opening.Align the case with plenum
opening and attach with sixfield-supplied sheet metal
screws (corrosion-resistant screws recommended).
2.Adjust the levelinglegs sothe case is level from
side to side and from level to 1Abubble tilt to the
outdoors.
Inside
wall
Air //
discharge
outlet
Leveling legs
m_
3. Using field-supplied screws, bolt the case
to the platform.
Secondary _" drain
External
drain
OR
NOTE:Piping is not Bolt case :_'_-........ Internal
supplied with the unit. to platform drain(s)
Obtain locally.
4.Connect the internal or external drain(s)as necessary.
21
[_INSTALL AND GROUND
THE UNIT TO THE CASE
UNIT INSTALLED THROUGH FRONT OF CASE
1. Slidethe back of the unit into the case,Pushthe unit
all of the way into the case until it stops.
NOTE:Eitherof the case sidesmay be removed
to enable the unit to be slidinto the case.
2. Ground the unit to the case by installing the front
case-to-unit hex-bolt and discard the two case-to-unit
sidescrew.
[_]INSTALL AND GROUND
THE UNIT TO THE CASE
UNIT INSTALLED THROUGH SIDE OF CASE
1. Slidethe sideof the unit into the case. Pushthe unit
all of the way into the case until it stops.
NOTE:Eitherof the case sidesmay be removed
to enable the unit to be slidinto the case.
2.Attach the case side panel to the main case.
3. Ground the unit to the case by installing the front
unit-to-case hex-bolt and discard the two case-to-
unit sidescrew.
Side screw
Loading ...
Loading ...
Loading ...