Craftsman 917387402 rotary lawn mower

User Manual - Page 14

For 917387402.

PDF File Manual, 29 pages, Download pdf file

Loading ...
Loading ...
Loading ...
To change from medium low to low
position, only the lower handle section
will have to be turned over.
ShippingPosition Medium High
Lower Handle
Squeeze to Handle
remove Bracket
Mounting
pin
Sewn hem
tubular frame
Flip lid
Lower frame
(Frame_ must
be fully
Tubular frame
Iowe_
Hairpin Clip
ENGINE
TO ASSEMBLE GRASS CATCHER
Insert leg of tubular frame through front
opening of grass catcher and thread
frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the
straight leg of the tubular frame.
When frame comes out the other end of
sewn hem, immediately work the end of
frame down inside the bag as shown in
inset.
Slide sewn hem evenly around the
tubulaJ_fmme until both ends of frame
are exposed out of the front opening.
Assemble lower frame to tubular frame
as shown. Be sure handle is outside of
bag and frames are fully seated as
shown in inset.
Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too-stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
Close the flip lid. Flip lid must be closed
while operating lawn mower.
=,CAUTION: Do not run your lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear door
removed or propped open.
CARBURETOR
Your carburetor has a non-adjustable fixed
main jet for mixture control. If your engine
does not operate properly due to sus-
pected carburetor problems, take your
lawn mower to an authorized service
center for repair or adjustment.
IMPORTANT: Never tamper with the
engine governor, which is factory set for
the proper engine speed. Overspeeding
the engine above the factory high speed
scan be dangerous. If you think the
engine-governed high speed needs
adjusting, contact your nearest authorized
service center, which has proper equip-
ment and experience to make any
necessary adjustments.
ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury. If you
believe that the engine is running too fast
or too slow, take your lawn mower to an
authorized service center for repair and
adjustment.
14
Loading ...
Loading ...
Loading ...