Loading ...
Loading ...
Loading ...
SECTION 2. PREPARE YOUR MACHINE
FOR SEWING
Plug in the machine and switch on the power
(_ Machine plug
(_) Three-prong plug connector
_) Power supply plug
(_) Power supply
(_) Light/power switch
NOTE: Before inserting the plug into your machine, be sure
the power switch is OFE
Check your outlet to be sure it is a 110 to 120 Volt AC
outlet
Insert the machine plug (_ into the three-prong plug
connector (_), as shown. It will only fit one way.
Insert the power supply plug (_ into the wall outlet 1_).
Push the light/power switch ® to turn on the power and
sewing light
SAFETY FEATURE:
Your machine will not operate unless the light/power switch
is turned on.. If you are interrupted or stop sewing, turn off
the light/power switch to prevent injury to children
®
Foot control use
C) Foot control
The foot control regulates the speed at which you sew.
To increase speed, gently press down with the ball of your
foot,
To decrease speed, release your foot pressure slightly.
NOTE: The foot control is sensitive and will increase or
decrease your sewing speed immediately.
Practice on a scrap of fabric to regulate your
sewing speed to your taste and needs.
OPERATING INSTRUCTIONS:
"For appliances with a polarized plug (one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way, If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not modify the plug in any way,"
"Foot Controller Model YC-482P for use with Sewing machine
Model 385 16633xxx?'
xxx-represents numbers 000 through 9g_
14
Loading ...
Loading ...
Loading ...