Loading ...
Loading ...
Loading ...
www.eureka.com 13
!
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor
overheating.
proceed as follows: 1) Push the power switch to off and
unplug the vacuum. 2) Check the vacuum for a possible source of overheating such as a full
least 30 minutes before attempting to use the vacuum. 3) After the 30 minute period, plug
the vacuum back in and turn on the switch. If the vacuum still does not work, call the Eureka
Customer Service HELPLINE at 1-800-282-2886.
• Push plug securely into outlet, try another outlet or check
circuit breaker.
• Step on power switch to turn vacuum on.
• See detailed “thermal cut-off” instructions above.
•
•
• Check vacuum height adjustment knob position.
• Clean brushroll if needed. Page 11.
• See other solutions above.
•
Remove clogs from the hose or wand that restrict
• Check brushroll for debris.
• Replace broken or out of shape belt. Page 12.
• Adjust vacuum height knob to a higher position.
• Check brushroll for debris and clean if needed. Page 11.
• Check turbo brush for debris. Page 11.
Loading ...
Loading ...
Loading ...