Loading ...
Loading ...
Loading ...
OMEGA ALTISE
OPERATING INSTRUCTIONS
HEATING MODE
• Press MODE button repeatedly until the LED of HEAT operation lights up.
• Press ADD/MINUS button to set the temperature higher than the room temperature. The fan speed can
also be set by pressing SPEED button.
Note: The drainage hose should be attached to the unit for continuous operating.
VENTILATION MODE
• Press MODE button repeatedly until the LED of FAN operation lights up.
• In ventilation mode the room air is circulated, but not cooled.
• Press SPEED button repeatedly to select the fan speed as desired.
DRY MODE
• Press MODE button on the control panel or remote control, the LED of DRY operation lights up.
• The fan speed is unable to select. User should connect the hose to the drain outlet at the bottom of the
unit.
Note: In this mode, the fan speed switches over to low speed and the temperature cannot be selected.
SLEEP MODE
The sleep mode can be activated when in cool mode and heat mode.
In cool mode :
After 1 hour the pre-set temperature is increased by 1 ℃, after another hour the pre-set temperature will again
be increased by 1 ℃.
In heat mode:
After 1 hour the pre-set temperature is decreased by 1 ℃, after another hour the pre-set temperature will again
be decreased by 1 ℃.
Then the temperature is kept constant for 10 hours. And all the indicators dim to dark. The fan speed may switch
over to low speed for silent operating and cannot be selected.
TIMER SETTING
The timer has two ways of operation:
16
Loading ...
Loading ...
Loading ...