Loading ...
Loading ...
Loading ...
OPTIONS CAN BE WHAT IT DOES ADDED TIME TO CYCLE ADDED
SELECTED WITH WATER
TYPICAL MAX GALLONS
(LITERS)
Pr0Dr'" Dries dishes With heat and IAvai!able With any Iuses the heating I I 51 0
a fanl This 0Ption with the Cyc!e except Rinse element to heat air,
use of rinse aid w II provide Ony plus a system of
the best drying vents and a fan that
performance. Plastic items ventilates moist air
awe less likely to deform I I out of the
when loaded in the top dishwasher to
T
rack. Turn ProDry M option speed dry ng times.
off for an air d_ ProDryTM option
defaults to ON
When any cyc e s
I I selected except for .......... .......... ..........
: : . 1 Hour Washl . . .
Heat Dry Dries dishes with heat.
This option with the use of
rinse aid will provide the
best drying performance.
Plastic items are less likely
to deform when loaded in
the top rack. Turn Heat Dry
off for an air dry.
Runs the dishwasher at a
later time or during off-
peak electrical hours,
Select awash cycle and
optionsl Press the Delay
button. Press START/
Available with any
cycle except Rinse
Only
Activates the
heating element at
the end of the wash
cycle to speed
drying times. Heat
Dry defaults to ON
when any cycle is
selected except for
1 Hour Wash.
52 52 0
Availab!e with any Delays the start of a 240
cycle cYCle to the
specified time. ..... .....
I
2,4,8 Hr. RESUME Cios e the door I'
Delay firmly. ....
NOTE: AnYtime the door is
opened (such as toadda
dish), the Start/Resume
button must be pressed ....
again to resume the delay
countdownl
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The Control
Lock light will stay on for a short time, indicating that it is activated, and all buttons are disabled. If you press any button
while your dishwasher is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the
controls are locked.
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCEL, or by opening and
closing the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold CONTROL LOCK or 4 HOUR DELAY (depending on model) for 3 seconds. The
light turns off.
NOTE: If your model requires you to press and hold 4 HOUR DELAY to lock the controls, the Control Lock LED will be
on or off to indicate if Control Lock is active or not.
Control
Lock
Hold 3 Sec
or
4 Hour
Delay
Control Lock
Hold 3 5e¢
CONTROL PURPOSE COMMENTS
St:Ltdlr To start or resume a If the door is oPened during a CYcle orthe powe r ,s ,nterrupted, the Start/Resume indicator
RESUME washcyce fashes. Thecycew not resume unt thedoor scosedandSTART/RESUME spressed.
NOTE: Ifthe Start!Resume button is located ontop of door, push door firmly c!osed within
Repeat Last
... 3 seconds of pressing START/RESUME. If the door is not closed within 3 seconds, the
Lye eStartiResumebutt0nLEDw! fash, anaud!bet0newJ beheard, and the cyc ew! not
start.
10
Loading ...
Loading ...
Loading ...