ISpring ED2000 Whole House Water Descaler, Alternative Electronic Salt-Free Hard Water Conditioner

User Manual - Page 5

For ED2000.

PDF File Manual, 8 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
- 3 -
laundering is significantly reduced.
After 1 month:
With the loosening of scale from water heating system, it should take lesser time for heating the
water. The amount of scale on pipes, faucets and showerheads should be significantly reduced.
AFTER 3 months:
Disappearance of scale from showerhead. Scaly crust in toilets is significantly reduced. No new crust
should form. Depending upon the age of scaling and hardness of water it may take up to 12 weeks for
these effects to appear.
Please note: The ED2000 is NOT a water softener and does not REMOVE calcium or magnesium from
the water.
INSTALLATION
WHERE TO INSTALL THE ED2000
The ED2000 should be applied on the main water supply pipe through which water enters the building.
This will optimize the operation of ED2000 and will ensure that the system conditions all of the water
supplied to the building. If a water meter or grounding cable is used, it’s recommended to install the
ED2000 after the water meter or grounding cable attached to the plumbing system. The ED2000 can be
used effectively on any type of water pipe; galvanized, copper, or plastic. ED2000 should be installed at
least ten feet from any TV, radio or cordless telephone or any other electronic system to minimize
possible interference.
HOW TO INSTALL THE ED2000
STEP1: WRAP THE COILS
Wrap the left antenna from center to left, starting under the water pipe. Wrap the right antenna from
center to right, starting over the water pipe. This way ensures two coils are formed into continues
counter-clockwise circles against water flow. Each coil is long enough to wrap at least 12 rounds on 3/4-
inch pipe. Minimum 7 rounds are required, the more the better. Secure the wrappings with included
cable ties.
STEP2: MOUNT THE UNIT ON THE WALL
Mount or hung the ED2000 on the wall using screws. For convenience, it could also be tied on water
pipe using cable ties.
STEP3: PLUG IN POWER ADAPTER
The LED lights should start flashing sequentially and indicates that the ED2000 is functioning properly.
Loading ...
Loading ...
Loading ...