Loading ...
Loading ...
Loading ...
14 15
You can connect up to 4 different pairs of SYNC by 50
™
wireless
headphones to the same audio source - perfect for gaming, movies or
music-sharing sessions when you don’t want to disturb the neighbors.
Place the 1st additional headphone unit into Association Mode by
holding down the SYNC / Bass Boost ( ) button for 3 seconds; the
blue LED will begin to blink rapidly.
1
]
• Repeat this step for up to 3 additional headphone units before
continuing the process.
To associate additional units:
Put the 3.5mm wireless transmitter dongle into Association Mode by
holding down the SYNC ( ) button for at least 3 seconds; the blue
LED will being to blink rapidly.
2
]
• After a few seconds, you may hear a short burst of music - the
association process is not finished yet as the transmitter is syncing
with each additional pair of headphones.
• After about 20 seconds, all of the additional headphones are now
associated with the same transmitter dongle and the blue LEDs will
flash in unison at a slower speed.
Track control can be performed by using either the onboard control
panel or directly at the audio source.
• All track and volume control buttons are located on the right earcup.
Detailed User Guide Detailed User Guide
RIGHT EARCUP
Volume Up
Previous Track (REV)*
Volume Down
Next Track (FF)*
*Track REV and FF only work with USB or 30-pin transmitters.
Loading ...
Loading ...
Loading ...