Loading ...
Loading ...
Loading ...
Contractionandexpansionoftheinsidewallsmaycausea
poppingnoise.
Youmayhearairbeingforcedoverthecondenserbythe
condenserfan.
Youmayhearwaterrunningintothedrainpanduringthe
defrostcycle.
REFRIGERATOR USE
In order to ensure proper temperatures, you need to permit air to
flow between the two sections. Cold air enters the bottom of the
freezer section and moves up. It then enters the refrigerator
section through the top vent. Air then returns to the freezer as
shown.
Do not block any of these vents with food such as soda, cereal,
bread, etc. If the vents are blocked, airflow will be prevented and
the temperature controls will not function properly.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer from food, wrap or cover foods tightly.
Your model may have Rotary Controls or Slide Controls.
IMPORTANT:
• Your refrigerator will not cool when the Refrigerator Control is
set to OFR
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment temperature. Higher numbered settings make
the compartment colder. Lower numbered settings make the
temperature less cold.
• Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a
higher (colder) setting will not cool the compartments any
faster.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still at the set points as shown.
Rotary Controls
FREEZER REFRRGERATOR
(
O O
I" " "_" 2 5
COLD COLDER COLD 1 6 COLDER
Slide Controls
Freezer Refrigerator
C
cold l 2 =, 3 4 colder off I 2 A 3 4 colder
Adjusting Controls
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures.
If you need to adjust temperatures, adjust the refrigerator
temperature first.
Rotary Controls
Turn the control right (clockwise) to make the compartment
colder. Turn the control left (counterclockwise) to make it less
cold.
Slide Controls
Slide the control one setting to the right to make the
compartment colder. Slide the control one setting to the left to
make it less cold.
CONDITION/REASON:
REFRIGERATOR too cold
- Not set correctly for your
conditions
REFRIGERATOR too warm
- Door opened often, large amount
of food added or room temperature
very warm
FREEZER too cold
- Not set correctly for your
conditions
FREEZER too warm/too little ice
- Door opened often, or large
amount of food added or very cold
room temperature (can't cycle often
enough) or heavy ice usage
SETTING
ADJUSTMENT:
REFRIGERATOR
Control one setting
lower
REFRIGERATOR
Control one setting
higher
FREEZER Control one
setting lower
FREEZER Control one
setting higher
10
Loading ...
Loading ...
Loading ...