Heath Zenith SL-2747-02 User Manual

Loading ...

-4-

598-1112-06

FRONT

REAR

TRANS

Figure 4 - Mounting Snap-On Cover

INSTALL CHIME COVER

Place chime cover securely over base.

• For hang pin and hole covers: Attach hang pin to base prior

to mounting base on wall. Line up hole in cover with pin and hang

(seeFigure3).

• For snap-on covers: Apply pressure to the cover until it snaps

intoplace(seeFigure4).Firmlygraspcoverandpulltoremove

from base.

• For hang bracket covers: Determine if the cover will hang

vertically or horizontally on the base. Place bracket into the cor-

rect slot inside chime cover.

Adjust bracket (if necessary) so that bracket is ﬂush with back

surfaceofcover.Slidebracketintoslotonbasetohangcover(see

Figure5).

Note:Neverusecleanersorpolishes.Neveruseanyuidsonthe

chime mechanism. Use dry cloth to clean chime cover and base.

FRONT

REAR

TRANS

Figure 3 - Pin for Hanging Cover

Hang Pin,

Snap-On Type

Illustrations may

vary from actual

chime unit.

Snap-On Cover

Base Orientation

Marking

Hang Pin, Slide-On Type

Loading ...

Heath Zenith SL-2747-02 Satin Nickel Wired Door Chime