Loading ...
Loading ...
Loading ...
8
OPERATION
Using the Clock
Using the Projector
This alarm clock projects the current time and the
indicator (when the alarm
is ON).
To power ON the projector, slide the projector ON/OFF switch to the “ON”
position. To power OFF the projector, slide the projector ON/OFF switch to the
“OFF” position.
During power adapter usage, when the projector ON/OFF switch is in the ON
position, the projector will be ON by default. When operating the clock using
back-up batteries only, please note that the projector will be OFF by default.
Press the SNOOZE•LIGHT button to turn on the projector for 5 seconds
(momentary to conserve battery power).
Rotate the projector to view the projection on a wall or ceiling. Press the
button to rotate the orientation of the projection 180 degrees. Focus the
projector by turning the FOCUS dial, located on the back of the clock. Please
note, some rough surfaces may not display the projection clearly.
DO NOT touch or stare directly into the projector lens.
Turn the Alarm ON/OFF
To turn alarm ON, press the ALARM ON/OFF button. When alarm function is
ON, the
icon will be displayed.
To turn alarm OFF, press the ALARM ON/OFF button. When alarm function is
OFF, the icon will disappear.
Set the Alarm Time
Press and release the ALARM ADJUST button to enter ALARM SET mode.
To adjust the currently selected (ashing) item, press and release the
“
”
or
“
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the ALARM ADJUST button to
adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR
ALARM CLOCK MINUTE
VOLUME
You will automatically exit ALARM SET MODE if no buttons are pressed for
5 seconds. Enter ALARM SET MODE at any time by pressing the ALARM
ADJUST button.
Loading ...
Loading ...
Loading ...