Loading ...
Loading ...
Loading ...
OvenContro! Fun ctions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
CLOCK BAKE TIME
PAD-- Used PAD-- Used to
to set the enter the length of
time of day. the bakim time.
INTERIOR OVEN _ "
LIGHT PAD-- Used to
turn even interior light _.
ON or OFF. This pad is _.
also used to activate
the Cooktop Lookout _ _ _/_.,
SELF-CLEAN PAD--
® • ®
Used to select the _ _,_
Self-Cleaning cycle. A-------_ (:lean) /Ti_r) / _t_rt )
2 or 3 hour Self-Clean _ _
time may be selected. J _
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean timer.
BAKE PAD--Used
to select the bake
function.
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in
,_ BsROIL PAD_ Used to
_ select the variable broil
function.
Q Oven
0 Preheat
Q #Dot Locked
OVEN LOCK PAD-- Used
to set the Oven Lockout
function.
TIMER ON/OFF PAD-- START TIME
Used to set or cancel the PAD-- Used to set
minute timer. The minute the desired start
timer does not start or stop time for baking &
cooking. Also, Self-Clean. May be
TIMER ON/OFF pad is used used with BAKE
to set the Continuous Bake TIME to program a
feature, delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated.
CLEAR/OFF PAD-- Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
lockout setting.
*Note: The OVEN indicator light on theelectronic disPlaY Wi!!turn ON and OFF when using the Bake feature and during
preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature, When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed, if desired, the control can be programmed for
silent operation. Press and hold _. After 7 seconds, the control will beep once. This will block the controls from
sounding
when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control
beeps
once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
Press _. "----" appears in the
1.
display.
2. Press and hold the A until "Hi" appears in the display.
Press and hold _ until °F or °C appears in the
3.
display.
4. Press the /_, or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10
Loading ...
Loading ...
Loading ...