Loading ...
Loading ...
Loading ...
Before Lighting
Warning: Important! Before Lighting...
Check the gas supply line tbr cuts, wear or abrasion.
Always keep your f:ace and body as f:ar away from the
grill as possible when lighting.
Grill Burner Lighting
This unit comes equipped with (2) electronic starters
and (6) electrodes. The electronic starter located on the
right side burner lights the Bottom Infrared Burner
which is controlled by Knob #1 and the Side Burner.
The electronic starter on the left shelf lights the Main
Burners, which are controlled by Knobs 2,3,4,5 & 6.
The left electronic starter also lights the Back Infrared
Burner.
Back Knob Knob Knob Knob Knob Knob Knob Knob
Infrared #6 #5 #4 #3 #2 #1 #SB2 #SB1
Left electric starter
For Main Bmners #2,
#3, #4, #5 & #6 and
Back Infiared Burner
Right electric starter
For Bottom Infiared
Burner (knob #1) &
Side Bmner (knobs
#SB1 & #SB2)
Lighting the Grill with electronic ignitors
Always open the lid before attempting lighting.
Push and turn one of the control knobs counter clock-
wise to the "ttlGH" position and immediately press
the electronic ignitor button. You'll hear a snapping
sound. It may be necessary to hold the electronic
starter button for about 4 seconds. If the burner does
not light in 4 seconds, turn the knob to OFF and wait
5 minutes belbre trying again. Repeat above steps to
light remaining burners. (See Fig. 14)
Match Lighting
If by chance the electronic ignitor does not light the
burner, the burner may be lit with a match. Keep
your face as far away from the Grill surface as
possible and pass a lit, long stem match through the
spaces in the Grill rack to the ports of the back
crossover burner between the flavor grids. Position
the match near the burner ports and push and turn the
control knob counter clockwise to the "ttlGtt"
position. (See Fig. 15)
Fig. 14
13
Fig. 15
Loading ...
Loading ...
Loading ...