Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
Carefully remove your kettle from the box. You may wish to retain the packaging for further use.
CLEANING BEFORE USING
Before first use, fill the kettle with cold water to the MAX water level mark, bring to boil
and discard the boiling water – do this twice.
This will ensure that any residues left over from the manufacturing process are
completely removed.
POSITIONING THE KETTLE
Find a flat sturdy surface near a wall outlet, safe from any direct heating source.
The underside of the power base is fitted with a cable storage feature. This is where you
wind and unwind the cord before and after use.
Unwind the length of the mains cable required to reach the mains socket.
Ensure the mains cable does not hang over the work surface edge.
FILLING THE KETTLE
Remove the kettle from the power base.
Open the lid by pressing the lid release button.
Fill the kettle between the MIN and MAX markings on the water level indicator with cold
water.
Close the lid and place the kettle back on the power base. Make sure the lid is securely
closed before boiling.
*Always remove the kettle from the power base before filling to ensure water does
not get into the electrical circuitry of the base. Do not fill the kettle above the MAX
mark.
OPERATING YOUR KETTLE
Connect the power cord into a 220-240V power outlet.
Turn your kettle ON. The LED will light, indicating that the heating and boiling process
has begun.
Loading ...
Loading ...
Loading ...