Loading ...
Loading ...
Loading ...
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed, should be performed by a Sears or other qualified service agent.
,_ WARN ING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
Vacuum cleaner won't
start.
1. Unplugged at wall outlet.
2. Tripped circuit breaker/blown
fuse at household servicepanel.
3. Loose hose electrical
connections.
Poorjob of dirt 1.
pick-up. 2.
3.
4.
5.
6.
Z
8.
9.
10.
11.
Vacuum cleaner starts
butshutsoff.
PowerMate will not
runwhen attached.
Full or clogged dustbag.
Clogged airflow passages.
Dirty filters.
Wrong pile height setting.
Wrong power level selected.
Hole in hose.
Worn PowerMate agitator.
Worn or broken belt.
Dirty agitator or end caps.
Canister hood open.
Tripped overload protector in
PowerMate.
1. Hose or hood electrical
connections.
2. Tripped overload protector in
PowerMate.
3. Tripped thermal protector
in canister.
1. PowerMate connections
unplugged.
2. Worn or broken belt.
3. Dirty agitator or end caps.
4. Tripped overload protector in
PowerMate.
5. Vacuum cleaner in BARE
FLOOR mode.
1.
2.
3.
4.
5.
6.
7.
8&9.
10.
11.
1. Plug in firmly, pressON/OFF switch.
2. Resetcircuit breaker or replace
fuse.
3. Reconnecthose ends.
Change bag.
Clear airflow passages.
Change filters.
Adjust setting.
Adjust control.
Replace hose.
Change agitator.
See BELTCHANGING AND
AGITATOR CLEANING. (page 22)
Closeand latch hood.
Removeany itemsthat may be
caught or jammed, then reset. If
vacuumcleaner startsand stops
again, clean agitator and end caps,
then reset.
1. Check connections, reconnect hose
ends.
2. Removeany itemsthat may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset.
3. See PERFORMANCE/SAFETY
FEATURES- "Thermal Protector."
(page 17)
1.
2&3.
4.
5.
Plug in firmly.
See BELTCHANGING AND
AGITATOR CLEANING. (page 22)
Removeany itemsthat may be
caught or jammed, then reset. If
vacuumcleaner startsand stops
again, clean agitator and end caps,
then reset.
PressCARPET/BAREFLOOR
buttonto change to CARPETmode.
- 25-
Loading ...
Loading ...
Loading ...