Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 4791477A143/A
e
inside the oven cavity with a damp
microfibre cloth.
Programmed Pyrolytic function
To set a programmed Pyrolytic function:
1. Turn the function knob to the position .
The text alternated with the
duration of the Pyrolytic cycle will
appear on the display.
2. Use the increase and decrease
keys to set the Pyrolytic cycle duration.
3. Press the clock key .
The text will appear on the display
alternated with the previously set Pyrolytic
function duration added to the current time.
4. Press the or key to set the function
end time.
5. Press the clock key or wait for a few
seconds to activate the function.
The display shows the current time and the
symbol flashes to indicate that the
appliance is waiting to start the Pyrolytic function
and will finish at the time set by the user.
Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Use a tool (e.g. a spoon) to remove the bulb
cover.
4. Slide out and remove the light bulb.
5. Replace the light bulb with one of the same
type (40 W).
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
Like for the cooking functions, it is also
possible to set an end time for the
Pyrolytic function.
Power voltage
Danger of electrocution
• Unplug the appliance.
• Wear protective gloves.
Take care not to scratch the enamel of
the oven cavity wall.
Do not touch the halogen light bulb
directly with your fingers, use an
insulating material.
Loading ...
Loading ...
Loading ...