Loading ...
2
REV 4 - 1709221030
L-C2-153
CHARCOAL GRILL OVEN (optional)
If you purchased an oven with your charcoal grill it will come pre-
assembled from the factory.
The oven (with the rounded top Fig. 2-1) is easy to remove and replace.
Simply remove the cooking grids and lift the oven off of the grill, then
replace the cooking grids. To reinstall reverse the above process.
The smoker model oven has an angled lid and adjustable air vents to
aid in controlling the rate at which the charcoal burns. The oven may
be lifted off after removing the left and right retaining screws (Fig. 2-2)
on the inside of the oven.
Clean all surfaces with Fire Magic
®
foaming grill cleaner.
For stainless steel restoration and fi nish maintenance, see the
instructions enclosed with Fire Magic
®
products for stainless steel.
Ashes and dripping are removed by sliding the drip tray out
from beneath the grill. You must keep the drip tray heat shield in
position for proper operation.
WARMING RACK (if equipped)
The warming rack (Fig. 2-3) is packed separately. To install the warming
rack, carefully insert the rack hangers into the two holes in the back of
the inner oven hood, then lower the front of the rack to a level position.
To remove the warming rack, lift up on the front of the rack until the
rack hangers pull free from their supporting holes.
WARNING
Improper installation, adjustment, alteration, service, or maintenance can cause injury or property
damage. Refer to this manual. For assistance or additional information, consult a qualifi ed professional
installer or service agency.
INSTALLATION
THIS UNIT SHOULD NOT BE LOCATED IN A FULLY ENCLOSED AREA OF ANY KIND.
Retaining screw
Fig. 2-3 Warming rack in place inside oven
Fig. 2-2 Smoker hood retaining screws
Fig. 2-1 Charcoal grill oven
Loading ...
Loading ...
Loading ...