Loading ...
Loading ...
Loading ...
4
6. Operation and Maintenance
Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber
cloth.
7. Accessories
Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the package
and check to make sure that all the components are present. Contact the retailer that you purchased from or Amcrest
directly if anything is broken or missing in the package.
Product Introduction
This series of camera is adopted with CMOS image sensors that provide high performance, high megapixel resolution
that supports 4K video. It supports monitoring signals and audio via a coaxial transmission and standard BNC connection
and built in microphone. Transmission distances can range more than 700m (2296ft) @ 4K. This series can also support
CVI/TVI/AHD/Analog output as well as recognize high speed, long distance, and real time video transmissions.
Features
• 1/2" CMOS (OS08A10)AGC, AWB, AES
• 4K@15fps, 6M@20fps, 4M@30fps
• 2D/3D DNR, Smart IR Control
• DC12V, 2.0A
Installation
Before physically installing your camera, make sure the mounting surface can support up to 3x the weight of the
camera.
1) Locate the position in which you would like to place your camera and using the base of the camera, mark the 4
installation holes with a marker onto the mounting surface. These holes will be used to drill the holes needed to mount
your camera.
2) Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors, drill
the 4 holes and insert the wall anchors into the holes.
Loading ...
Loading ...
Loading ...