Loading ...
Loading ...
Loading ...
CAUTION: You must use distilled
water to keep the humidifier
working properly. Also, make sure
the connector is tightened to the
bottle to prevent water leakage.
3. Fully insert the humidifier into the
two hooks located in the rear side
of the wooden box as shown in
Figure 3.
CAUTION: Make sure the two hooks
are fully inserted and the DC
PLUG is connected to the DC
JACK.
4. Push down the moisture outlet
cover in the top of the wooden box
as shown in Figure 4.
CAUTION: Make sure the moisture
outlet cover is slide open before
using the humidifier.
5. Insert bottle, attached to connector,
into the humidifier, as shown in
Figure 5.
Special Features
LED Display – When the unit is plugged in, the LED display will show the room
temperature. At ECO mode, it will display the set value 2 minutes after the
desired temperature is set.
Overheat Cut-Off Protection System –This heater includes a protection system
that cuts off the unit if it overheats for any reason.
FIG 4
FIG 5
DC PLUG
FIG 3
HOOK
Loading ...
Loading ...
Loading ...