Loading ...
Loading ...
Loading ...
Most laundering problems are easily
solved if you understand the cause.
Using the charts below will save you
time and money by helping you avoid
unnecessary service calls.
Problem Possible Cause Solution
Not Dq!ing Lint screen is clogged with lint. Clean lint screen.
Satisfactorily Restricted air movement.
Exhaust vent/duct or outside
exhaust hood is clogged with lint.
Run dryer for 5-10 minutes. Hold
hand under outside exhaust hood to
check air movement. If you do not feel
air moving, clean exhaust system of
lint or replace exhaust vent/duct with
rigid metal or flexible metal vent/duct.
Exhaust vent/duct is crushed Replace with heavy metal or flexible
or kinked, metal vent/duct.
One fuse is blown or circuit Replace fuse or reset breaker.
breaker is tripped. The dryer
will appear to operate, but
you will not get any heat.
Fabric softener sheets Use only one softener sheet per load
blocking outlet grill, and only use it once.
Dryer located in room with Move dryer where it can operate in
temperature below 45°E ambient air temperatures above 45°E
Large amount of moisture Expect longer dry times with items
in the load. that hold more moisture (cottons).
C,old rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky to Separate load to tumble freely.
dry quickly.
Dryer Will Power cord not firmly plugged Plug power cord into a live circuit.
Not Run into a live circuit with proper
voltage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Using a time-delay fuse. Replace with a regular fuse.
Dryer door not firmly closed. Close dryer door tightly.
PUSH TO START button not Press PUSH TO START button again.
firmly pressed.
Controls not set in an Reset controls in an ON position.
ON position.
25
Loading ...
Loading ...
Loading ...