Loading ...
Loading ...
Loading ...
Wash Cyces and Opt o
Water Levels
Auto Wate_ Leve_
Your Fcosmsr; _'can automatically select the appropriate
water level for the load
1 Place your clothes in the machine, and press Power
2 Select wash cycle (select Auto water level if not
automatically selected)
s PressSTART/PAUSE
During fill the machine will pause occasiorially to sense
the water levd The machine will check if the water
level is correct by using a series of two different agitate
strokes (This may take over a minute). If it detects that
the water level is not enough, it will fill with more water
and recheck the level
0 Ho_
0 W_rm
0 Cdff
W_$h
A_O
0 H@h
0 Med
0 L_w
Wa@r
L_vd
0 F_st
0 SPew
0 Hdd
o When washing an unusual load eg, large bulky
garments, pillows, we recommend you manually select
the water level and select the Delicate cycle,
Manually select the water level if there is already water in
the machine
For a large bulky load, or large single item (eg. comforter)
push the load down after the first fill
Ma_sua_ Wate_ Leve_ Selection
The agitator has five levels marked or its stem that car]
be used to help you select the correct water levels
<}electthe correct water level by using the mark nearest
to the top of the clothes
The levels marked on the agitator do not correspond
exactly to the level of water. They indicate the level of
dry clothes suitable for the water level
o Your tkosrr/_;r/-T_'may occasionally add water during
a(_itation This is to maintain the water level due to the
release of air trapped in the garments
o Out of balance loads, tangling or splashover can be
caused by selecting a water level that is too high
ii "i
2O
Loading ...
Loading ...
Loading ...