Loading ...
Loading ...
Loading ...
CARE AND CLEANING
The efciency of the range hood system depends on the cleanliness of the intake and lters.
The frequency of cleaning depends on the amount and type of cooking.
• Do not use the ventilating system without the lters in place or with grease-laden lters or surfaces.
WARNING: To avoid risk of re and explosion do not use ammable liquids or solvents.
Always unplug or disconnect the appliance from the power supply before servicing.
WARNING: Be sure the entire hood (including the lters and light bulbs) has cooled and grease has
solidied before attempting to clean any part of the appliance.
Filters and drip trays
These hoods have reusable metal grease lters
and drip trays.
The metal lters also help prevent aming foods
on the cooktop from damaging the inside of the
hood.
For this reason, the metal lters must ALWAYS
be in place when the hood is used.
To Clean Filters and Drip Trays
•The metal lters and drip trays should be
cleaned once a month, or as needed.
•To clean the metal lters and drip trays, drain
and wipe all excess grease with a dry paper
towel. Soak them and then swish them around
in hot water and detergent. Don’t use ammonia
or ammonia products because they will darken
the metal.
•Do not use abrasives or oven cleaners.
Rinse, shake and let them dry before replacing.
They may also be cleaned in an automatic
dishwasher.
To Remove The Metal Grease Filters and the
Drip Trays
• Turn the fan and lights o.
• Push each handle towards the back and pull
downwards. Figure 1
• Unscrews the knobs that x the drip trays
holding brakets. Figure 2
• Grasp the drip tray and carefully lift it up and
out of the hood track. Figure 2.
To Replace The Metal Grease
• Reverse procedure.
To replace the Drip Trays
Figure 2-3:
1.Placeand seat thedriptray intothehoodtrack.
2. Slide them left or right until all trays are side
by side in place in the track.
3. Block rmly in place side drip trays with the
the drip trays holding brakets.
5
Figure 1
Figure 3
Figure 2
Loading ...
Loading ...
Loading ...