Loading ...
Loading ...
Loading ...
Use
68
Hob power limitation
1. Disconnect the appliance from the mains
power supply and wait 10 seconds
before turning the power back on.
2. Turn the front left and front right cooking
zone knobs anticlockwise at the same
time (to position “M-A” and “A”
respectively), and keep them in this
position for 3 seconds.
The rear left and rear right cooking zone
displays will indicate “7.” and “4”.
3. Release the knobs.
4. Turn and hold both knobs anti-clockwise
again.
The rear left and rear right cooking zone
displays will indicate the power levels “4.”
and “8”.
5. Release the knobs.
6. Turn and hold both knobs anti-clockwise
again.
The rear left and rear right cooking zone
displays will indicate the power levels “3.”
and “7”.
7. Release the knobs.
Possible cooking zone combinations
The induction hob is configured to
operate at 7.4 kW, but it can be
set to operate at 4.8 kW or 3.7
kW.
The power level of the hob must be
set within 2 minutes of it being
connected to the mains power
supply.
After having released the knobs at
the required power level, wait until
the displays turn off.
The power level can be changed
again up to 4 minutes after the
displays have turned off (without
having to disconnect the appliance
from the power supply).
The last power setting will remain
selected even in the event of a
power failure.
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5
9 99P -
999-7
9 9887
9 9P7-
99797
999P -
99 - P9
997-9
99788
99878
99 - 7P
Loading ...
Loading ...
Loading ...