Loading ...
Loading ...
Loading ...
EN
35
Operation
www.bora.com
Activating the automatic extractor function for a
cooking session
Tap the fan button .
The fan symbol lights up blue.
An animation appears on the slider.
A
appears in the 7-segment display.
6.4.4 Switching the fan off
Swipe downwards to power level 0.
or
tap until power level 0 is reached.
or
long press on the fan button .
The automatic after-run function is started.
As soon as the automatic after-run stops, the cooktop
extractor fan is switched off.
6.4.5 Switching off the automatic after-run
early
Tap the fan button
or
tap the minus button
The cooktop extractor after-run function is switched
off.
INFO BORA expressly recommends use of the cooktop
extractor after-run function.
6.5 Operating the cooktops
INFO To be able to operate the cooktops, cooktop
operation must be active in the operating panel
(colour mode “red”).
INFO If no commands are entered within 3.5 seconds
when the cooktop operating panel is active,
the system automatically switches back to fan
operation (standard display).
6.5.1 Selecting cooking zones
INFO With this system you can operate and control up
to 4 cooking zones at the same time.
Tap on a cooking zone.
The system changes to colour mode “red”.
The system switches to the power display.
The additional cooking zone functions appear.
Cooking zone operation is activated and you can make
settings for the chosen cooking zone.
Repeat this process to operate further cooking zones if
necessary.
INFO A cooking zone can be switched off early by
a further touch command in the cooking zone
display. The system then immediately switches to
fan operation.
Increasing the power level
Swipe upwards to the required power level
or
tap until the required power level is reached
or
tap a higher position on the slider
or
long press on (power level is increased in twos: 0,
2, 4...)
Reducing the power level
Swipe downwards to the required power level
or
tap until the required power level is reached
or
tap a lower position on the slider
or
long press on (power level is decreased in twos: ...
4, 2, 0)
6.4.2 Fan power setting
Activating the power setting
Long press on the slider at position 5
or
Tap on when power level 5 is active
An animation appears in the slider.
ßp
appears in the display (flashing 3x at first and then
continuous).
INFO After 10 minutes, the power setting is
automatically switched back to power level 5.
Deactivating the power setting
The fan power setting is deactivated early if another
power level is set (see Setting the fan power level).
6.4.3 Automatic extractor function
INFO The automatic extractor function automatically
adjusts the extraction performance to the
highest power level used on all cooking zones
that are currently in use. If the power level of a
cooking zone is changed, the extractor power is
automatically adjusted.
INFO On induction cooktops there is a 20-second delay
in the power level adjustment and on all other
cooktops there is a 30-second delay.
INFO The automatic extractor function can be disabled
manually at any time.
Permanently activating the automatic extractor
function
see the Menu chapter, menu item 3: Automatic extractor
control
Loading ...
Loading ...
Loading ...