Loading ...
Loading ...
Loading ...
Operating Instructions
TO CHANGE TEMPERATURE SETTING:
auto
m hi
mad
lo
heat
[] cool
energy saver
Zanonly
%
DO THIS:
PRESS A TO RAISE
V TO LOWER
YOU WILL SEE:
tamp/timer
auto
m hi
reed
lo
heat
[] cool
energy saver
fan only
Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display. This temperature will
be automatically maintained anywhere between 16 °C (60 °F) and 32 °C (90 °F) for cooling mode. The temperature will be auto-
matically maintained anywhere between 13 °C (55 °F) and 27 °C (80 °F) for heating mode. If you want the display to read the
actual room temperature. See "To Operate on Fan Only" section on this page.
TO AD]UST FAN SPEEDS" YOU WILL SEE:
auto
[] hi
reed
lo
temp/timer
DO THIS:
PRESSTO SELECT
auto
hi
mad
mlo
heat
[] cOOl
energy saver
fanonly
%
tamp/timer
TO USE AUTO FAN FEATURE=
tamp/timer
auto
hi
mad
•lo
[] cool
energy saver
fanon_
DO THIS:
PRESSFAN
BUTTON
SELECT AUTO
YOU WILL SEE:
tamp/timer
[] auto
hi
mad
lo
heat
[] cool
energy saver
fanonty
Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto-
matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set
temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the
heating mode on 115V models.
TO OPERATE ON FAN ONLY: YOU WILL SEE:
temp/timar
[] auto
hi
mad
lo
heat
[] cool
energy saver
Note: Use this function onl'
.______--------
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
auto
[] hi
mad
lo
heat
cool
energy saver
[] fan only
tamp/timer
when cooling is not desired, such as for room air circulation or to exhaust stale air on some models.
Loading ...
Loading ...
Loading ...