Loading ...
Loading ...
Loading ...
Adjustable Length Stop: DW7051
Requires the use of one work support (see drawing). It is used to make
repetitive cuts of the same length from 0 to 42".
Clamp: DW7082 (similar model included)
Used for firmly clamping workpiece to the saw table for precision cutting.
Dust Bag: DW7053 (Included with some models)
Equipped with a zipper for easy emptying, the dust bag will capture the
majority of the sawdust produced (not shown).
Crown Molding Fence: DW7084
Used for precision cutting of crown molding.
SAW BLADES: ALWAYS USE 12" SAW BLADES WITH 1" ARBOR HOLES.
SPEED RATING MUST BE AT LEAST 4800 RPM. Never use a smaller
diameter blade. It will not be guarded properly.
BLADE DESCRIPTIONS
TOOTH
APPLICATION MODEL # DIAMETER TEETH GRIND
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose DW3123 12" 32 ATB
Fine Crosscuts DW3126 12" 60 ATB
Fine Crosscuts DW3128 12" 80 ATB
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts DW7648 12" 60 ATB
Fine crosscuts DW7649 12" 80 ATB
Ultra-fine crosscuts DW7650 12" 96 ATB
Laminates DW7661 12" 80 TCG
Solid surface
and plastics DW7668 12" 80 Mod TCG
Non-ferrous metals DW7666 12" 80 TCG
Unpacking Your Saw
Check the contents of your miter saw carton to make sure that you have received
all parts. In addition to this instruction manual, the carton should contain:
1. One DW718 miter saw.
2. One DEWALT 12" diameter saw blade.
3. One blade wrench in wrench pocket shown in Figure 4.
4. One DW7053 Dustbag (some models).
5. One material clamp.
DW7080
END
PLATE
LOCKNUTS
DW7082
DW7084
DW7051
BRACKET
Loading ...
Loading ...
Loading ...